[U-Boot] [PATCH v6 0/6] Add Intel Arria 10 SoC FPGA driver

Chee, Tien Fong tien.fong.chee at intel.com
Fri May 26 08:48:38 UTC 2017


On Kha, 2017-05-25 at 08:35 -0500, Dinh Nguyen wrote:
> 
> On 05/25/2017 03:53 AM, Chee, Tien Fong wrote:
> > 
> > On Rab, 2017-05-24 at 09:56 -0500, Dinh Nguyen wrote:
> > > 
> > > 
> > > On 05/23/2017 09:24 PM, tien.fong.chee at intel.com wrote:
> > > > 
> > > > 
> > > > From: Tien Fong Chee <tien.fong.chee at intel.com>
> > > > 
> > > > This is the 6th version of patchset to adds support for Intel
> > > > Arria
> > > > 10 SoC FPGA
> > > > driver. This version mainly resolved comments from Dinh in
> > > > [v5].
> > > > This series is working on top of u-boot-socfpga-next branch
> > > > http://git.denx.de/?p=u-boot/u-boot-socfpga.git;a=shortlog;h=re
> > > > fs/h
> > > > eads/next.
> > > > 
> > > > [v5]: https://www.mail-archive.com/u-boot@lists.denx.de/msg2505
> > > > 17.h
> > > > tml
> > > > 
> > > > v5 -> v6 changes:
> > > > -----------------
> > > > - Created separate patch for enabling FPGA driver support.
> > > > 
> > > Please consider at least doing a compile test for this patch
> > > series?
> > > I'm
> > > now very skeptical that you've done any kind of testing on this
> > > patch
> > > series? :(
> > > 
> > > For 'make socfpga_cyclone5_defconfig:
> > > 
> > > arch/arm/mach-socfpga/built-in.o: In function
> > > `socfpga_bridges_reset':
> > > /home/dinguyen/linux_dev/u-boot/arch/arm/mach-
> > > socfpga/reset_manager_gen5.c:101:
> > > undefined reference to `fpgamgr_test_fpga_ready'
> > > arch/arm/mach-socfpga/built-in.o: In function
> > > `populate_sysmgr_fpgaintf_module':
> > > /home/dinguyen/linux_dev/u-boot/arch/arm/mach-
> > > socfpga/system_manager_gen5.c:48:
> > > undefined reference to `fpgamgr_test_fpga_ready'
> > > drivers/built-in.o: In function `sdram_mmr_init_full':
> > > /home/dinguyen/linux_dev/u-boot/drivers/ddr/altera/sdram.c:448:
> > > undefined reference to `fpgamgr_test_fpga_ready'
> > > scripts/Makefile.spl:334: recipe for target 'spl/u-boot-spl'
> > > failed
> > > make[1]: *** [spl/u-boot-spl] Error 1
> > > Makefile:1347: recipe for target 'spl/u-boot-spl' failed
> > > make: *** [spl/u-boot-spl] Error 2
> > > 
> > > For socfpga_arria10_defconfig:
> > > 
> > > arch/arm/mach-socfpga/built-in.o: In function `socfpga_fpga_add':
> > > /home/dinguyen/linux_dev/u-boot/arch/arm/mach-socfpga/misc.c:110:
> > > undefined reference to `fpga_init'
> > > /home/dinguyen/linux_dev/u-boot/arch/arm/mach-socfpga/misc.c:112:
> > > undefined reference to `fpga_add'
> > > scripts/Makefile.spl:334: recipe for target 'spl/u-boot-spl'
> > > failed
> > > make[1]: *** [spl/u-boot-spl] Error 1
> > > Makefile:1347: recipe for target 'spl/u-boot-spl' failed
> > > make: *** [spl/u-boot-spl] Error 2
> > > 
> > > 
> > > Dinh
> > I did the compilation on each patch, and testing the patch set on
> > all
> > arria10, cyclone5 and arria10 devkit.
> > 
> > I suspect something wrong with v6-0005-arm-socfpga-Move-FPGA-
> > manager-
> > driver-to-FPGA-driv.patch you applied. Could you help me check
> > again
> > and confirm all the patches waere applied properly?
> > 
> Yes, I've applied all of your patches correctly. The only diff
> between
> this series and the last is:
> 
> $ git diff tien_fong_fpga_a10_v5
> diff --git a/drivers/Makefile b/drivers/Makefile
> index b4a2230..4a4b237 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -47,7 +47,6 @@ obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
>  obj-$(CONFIG_SPL_SATA_SUPPORT) += block/
>  obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
>  obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
> -obj-$(CONFIG_FPGA) += fpga/
>  endif
> 
>  ifdef CONFIG_TPL_BUILD
> diff --git a/include/configs/socfpga_common.h
> b/include/configs/socfpga_common.h
> index 913b9f1..9edcd2d 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -109,6 +109,7 @@
>  #define CONFIG_FPGA
>  #define CONFIG_FPGA_ALTERA
>  #define CONFIG_FPGA_SOCFPGA
> +#define CONFIG_SPL_FPGA_SUPPORT
>  #define CONFIG_FPGA_COUNT              1
>  #endif
> 
> So the patch for using CONFIG_SPL_FPGA_SUPPORT is causing this build
> error. Please investigate.
> 
> Dinh

Hi Dinh,

I have tried with both u-boot.git and u-boot-socfpga.git lastest
version, i can't still reproduce the issue u have seen :(. Would you
mind to share me the details of the step to reproduce it such as on
what branch?

Hi Ley Foon,

Could you help to try out the patch set too?

Thanks a lot.

Fong.


More information about the U-Boot mailing list