[U-Boot] [PATCH v7 00/17] ARM: i.MX6: SabreSD: Add dts support

[Jagan Teki]

Hi Stefano/Fabio,

On Tue, May 23, 2017 at 1:28 PM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
> From: Jagan Teki <jagan at openedev.com>
>
> Fabio, please add your changes on-top-of this series.
>
> Compared to previous series, this series
> - Removed 'Fabio' patch changes.
> - Droped DM_I2C and DM_PMIC, since power driver need to chage dm
> - Added phy-reset-gpio support for fec_mxc driver
> - Added Linux merge tag details on dts patches
>
> Changes for v6:
> - rebase on u-boot-imx/master
> - Droped DM_I2C and DM_PMIC changes
> - Added phy-reset-gpio support for fec_mxc driver
> - Added Linux merge tag details on dts patches
> - Removed 'Fabio' patch changes.
>
> Changes for v6:
> - rebase on u-boot-imx/master
> - Fixed comments from 'Fabio' in v5
> - Droped file/directory rename changes patches
> - Droped dm_gpio changes on board
>
> Changes for v5:
> - rebase on master
> - removed SPL support for i.MX6DL SabreSD
> - Add board_fit_config_name_match for SPL to fetch board dts
> - Add imx6qdl_sabresd_spl_defconfig for common SPL support
>
> Changes for v4:
> - rebase on master
> - Rename imx6[dl|q]_sabresd_spl_defconfig to imx6[dl|q]_sabresd_spl_defconfig
> - Update README
> - Move CONFIG_FEC_MXC to configs/mx6[dl|q|qp]sabreauto_defconfigs
> - Add dts support for non-spl based defconfigs
>
> Changes for v3:
> - rebase on master
> - Added patch 'ARM: i.MX6: sabresd: Cleanup board code'
> - Added patch 'ARM: i.MX6DL: sabresd: Move DCD reginit on SPL'
>
> Changes for v2:
> - rebase on master
> - Added new-patches.
>
> Jagan Teki (17):
>   ARM: i.MX6: sabresd: Remove SPL_I2C_SUPPORT
>   ARM: dts: i.MX6: Add imx6qdl-sabresd.dtsi
>   ARM: dts: i.MX6: Add imx6q-sabresd.dts
>   ARM: dts: i.MX6: Add imx6dl-sabresd.dts
>   ARM: dts: i.MX6: Add imx6qp.dtsi
>   ARM: dts: i.MX6: Add imx6qp-sabresd.dts
>   sabresd: i.MX6Q: Add initial dts support
>   sabresd: i.MX6QP: Add initial dts support
>   SabreSD: i.MX6DL: Add initial dts support
>   SabreSD: Move CONFIG_SYS_I2C_MXC to defconfigs
>   SabreSD: Enable CONFIG_DM_REGULATOR
>   SabreSD: Enable DM_USB
>   i.MX6: Sabre: Move CONFIG_FEC_MXC to defconfigs
>   net: fec_mxc: Add 'phy-reset-gpios' support
>   i.MX6: SabreSD: Enable DM_ETH
>   i.MX6: sabresd: Drop checkboard
>   i.MX6: SabreSD: Cleanup board code

Can you finalize this series, early to have better test.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.