[U-Boot] [PATCH v3] sunxi: A64/Pine64: update device tree from Linux

[Jagan Teki]

On Wed, May 24, 2017 at 3:04 PM, Andre Przywara <andre.przywara at arm.com> wrote:
> The Linux device tree for the Allwinner A64 SoC has changed a lot since
> the U-Boot version was merged.
> Let's replace the current DT with a exact copy of the Linux one as of:
> commit c6778ff813d2ca3e3c8733c87dc8b6831a64578b
> Merge: 0ff4c01 3c0e3abd
> Author: Linus Torvalds <torvalds at linux-foundation.org>
> Date:   Tue May 9 10:07:33 2017 -0700
>
> This is the DT used in Linux 4.12-rc1.
>
> Since U-Boot has an Ethernet driver (while Linux does not yet), we
> provide the required DT nodes for it in an ...-u-boot.dtsi file, to both
> mark them as U-Boot specific and to allow easier upgrading once Linux gets
> the driver and its own binding later.
> Compared to the existing Ethernet DT nodes we just slightly tweak the clock
> and reset nodes in there to match the new bindings used by Linux for those.
>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
>  arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi    |  50 ++

Yeah, may be this need to be named something like
sun50i-a64-u-boot.dtsi as of now? since it may share the similar dt on
other a64 board that we initiate the discussion about orangepi, and
BPI.

All fine expect this name.

Reviewed-by: Jagan Teki <jagan at amarulasolutions.com>
Tested-by: Jagan Teki <jagan at amarulasolutions.com>

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.