[U-Boot] [PATCH 02/10] drivers: spi: add config to consider command bytes when writting to flash

[Jagan Teki]

On Sat, May 20, 2017 at 1:36 PM, Álvaro Fernández Rojas
<noltari at gmail.com> wrote:
> Hi Simon,
>
> El 20/05/2017 a las 4:29, Simon Glass escribió:
>> Hi Alvaro,
>>
>> On 18 May 2017 at 13:29, Álvaro Fernández Rojas <noltari at gmail.com> wrote:
>>> Command bytes are part of the written bytes and they should be taken into
>>> account when sending a spi transfer.
>>>
>>> Signed-off-by: Álvaro Fernández Rojas <noltari at gmail.com>
>>> ---
>>>  drivers/mtd/spi/spi_flash.c | 2 +-
>>>  drivers/spi/Kconfig         | 3 +++
>>>  include/spi.h               | 8 +++++++-
>>>  3 files changed, 11 insertions(+), 2 deletions(-)

Is this patch not part of your v2 BCM-SPI changes?

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.