[U-Boot] [RFC PATCH 5/5] rockchip: mkimage: use spl_boot0 for all Rockchip SoCs

[Dr. Philipp Tomsich]

Now that there are no remaining cases where (spl_boot0 == false), we can
drop the spl_boot0 field from struct spl_info and also remove the if-check
(leaving only the code-path for true in place).

There should be no need to keep the legacy code-path around, as GIT will
always remember them anyway.

Regards,
Philipp.

> On 31 May 2017, at 12:50, Kever Yang <kever.yang at rock-chips.com> wrote:
> 
> Enable the spl_boot0 in SPL and use the pre-padding TAG memory,
> the mkimage do not need to pad it but only need to replace the value
> with correct TAG value.
> 
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
> ---
> 
> tools/rkcommon.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/tools/rkcommon.c b/tools/rkcommon.c
> index 836a5a5..b58dfae 100644
> --- a/tools/rkcommon.c
> +++ b/tools/rkcommon.c
> @@ -68,10 +68,10 @@ struct spl_info {
> };
> 
> static struct spl_info spl_infos[] = {
> -	{ "rk3036", "RK30", 0x1000, false, false },
> -	{ "rk3188", "RK31", 0x8000 - 0x800, true, false },
> -	{ "rk3288", "RK32", 0x8000, false, false },
> -	{ "rk3328", "RK32", 0x8000 - 0x1000, false, false },
> +	{ "rk3036", "RK30", 0x1000, false, true },
> +	{ "rk3188", "RK31", 0x8000 - 0x800, true, true },
> +	{ "rk3288", "RK32", 0x8000, false, true },
> +	{ "rk3328", "RK32", 0x8000 - 0x1000, false, true },
> 	{ "rk3399", "RK33", 0x20000, false, true },
> };
> 
> -- 
> 1.9.1
>