[U-Boot] [PATCH v4 5/9] rockchip: video: add mpixelclock settings from Linux driver

[Philipp Tomsich]

The Linux driver now supports higher mpixelclock settings.
Add these to rockchip_phy_config[] and rockchip_mpll_cfg[].

Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>

---

Changes in v4:
- new patch (split off from the earlier RK3399 HDMI encoder change)

Changes in v3: None
Changes in v2: None

 drivers/video/rockchip/rk_hdmi.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/video/rockchip/rk_hdmi.c b/drivers/video/rockchip/rk_hdmi.c
index db07588..2af4995 100644
--- a/drivers/video/rockchip/rk_hdmi.c
+++ b/drivers/video/rockchip/rk_hdmi.c
@@ -35,6 +35,9 @@ static const struct hdmi_phy_config rockchip_phy_config[] = {
 		.mpixelclock = 297000000,
 		.sym_ctr = 0x8039, .term = 0x0005, .vlev_ctr = 0x028d,
 	}, {
+		.mpixelclock = 584000000,
+		.sym_ctr = 0x8039, .term = 0x0000, .vlev_ctr = 0x019d,
+	}, {
 		.mpixelclock = ~0ul,
 		.sym_ctr = 0x0000, .term = 0x0000, .vlev_ctr = 0x0000,
 	}
@@ -60,6 +63,12 @@ static const struct hdmi_mpll_config rockchip_mpll_cfg[] = {
 		.mpixelclock = 148500000,
 		.cpce = 0x0051, .gmp = 0x0003, .curr = 0x0000,
 	}, {
+		.mpixelclock = 272000000,
+		.cpce = 0x0040, .gmp = 0x0003, .curr = 0x0000,
+	}, {
+		.mpixelclock = 340000000,
+		.cpce = 0x0040, .gmp = 0x0003, .curr = 0x0000,
+	}, {
 		.mpixelclock = ~0ul,
 		.cpce = 0x0051, .gmp = 0x0003, .curr = 0x0000,
 	}
-- 
1.9.1