[U-Boot] [PATCH v3 02/21] part: extract MBR signature from partitions

[Fabio Estevam]

Hi Tom,

On Mon, Oct 2, 2017 at 4:32 PM, Tom Rini <trini at konsulko.com> wrote:

> FWIW, on cubox the current status is looping, and your kludge I just get
> no output :(  But there may be some other problems here too as I'm

Just tried it on 2017.11-rc1 plus the attached hack and it boots fine:

U-Boot SPL 2017.11-rc1-dirty (Oct 02 2017 - 21:27:10)
Trying to boot from MMC1


U-Boot 2017.11-rc1-dirty (Oct 02 2017 - 21:27:10 -0300)

CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 26C
Reset cause: POR
Board: MX6 Cubox-i
DRAM:  2 GiB
MMC:   FSL_SDHC: 0
No panel detected: default to HDMI
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial
Net:   FEC
Hit any key to stop autoboot:  0
=>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-workaround.patch
Type: text/x-patch
Size: 966 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171002/7bd3f52d/attachment.bin>