[U-Boot] [PATCH v2] arm64: ls1012afrdm: Add distro boot support

York Sun york.sun at nxp.com
Thu Oct 5 15:00:10 UTC 2017


On 10/05/2017 01:47 AM, Rajesh Bhagat wrote:
> Include common config_distro_defaults.h and config_distro_bootcmd.h
> for u-boot enviroments to support automatical distro boot which
> scan boot.scr from external storage devices(e.g. SD and USB)
> and execute autoboot script.
> 
> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya at nxp.com>
> Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
> ---
> Depends on:
> https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatchwork.ozlabs.org%2Fpatch%2F808617%2F&data=01%7C01%7Cyork.sun%40nxp.com%7C83457d3a96b74d7dd33d08d50bcdb2c9%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0&sdata=sKmaJpoaeK1JXMf%2F%2Ba%2BPlUQtY3HumeB08I6MKTWchzc%3D&reserved=0
> 
> Changes in v2:
>  - Removed the extra "\" character from macro definition
>  - Dropped the #if for CONFIG_BOOTCOMMAND
> 
>  configs/ls1012afrdm_qspi_defconfig |  1 +
>  include/configs/ls1012afrdm.h      | 57 ++++++++++++++++++++++++++++++++------
>  2 files changed, 49 insertions(+), 9 deletions(-)
> 
> diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig
> index fe95f04..42acff0 100644
> --- a/configs/ls1012afrdm_qspi_defconfig
> +++ b/configs/ls1012afrdm_qspi_defconfig
> @@ -46,3 +46,4 @@ CONFIG_DM_USB=y
>  CONFIG_USB_XHCI_HCD=y
>  CONFIG_USB_XHCI_DWC3=y
>  CONFIG_USB_STORAGE=y
> +CONFIG_DISTRO_DEFAULTS=y
> diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
> index 6b1ba57..4d6448b 100644
> --- a/include/configs/ls1012afrdm.h
> +++ b/include/configs/ls1012afrdm.h
> @@ -20,16 +20,55 @@
>  #define CONFIG_SYS_MEMTEST_START	0x80000000
>  #define CONFIG_SYS_MEMTEST_END		0x9fffffff
>  
> +#ifndef CONFIG_SPL_BUILD
> +#undef BOOT_TARGET_DEVICES
> +#define BOOT_TARGET_DEVICES(func) \
> +	func(USB, usb, 0)
> +#endif
> +
>  #undef CONFIG_EXTRA_ENV_SETTINGS
> -#define CONFIG_EXTRA_ENV_SETTINGS              \
> -       "verify=no\0"                           \
> -       "loadaddr=0x80100000\0"                 \
> -       "kernel_addr=0x100000\0"                \
> -       "fdt_high=0xffffffffffffffff\0"         \
> -       "initrd_high=0xffffffffffffffff\0"      \
> -       "kernel_start=0xa00000\0"               \
> -       "kernel_load=0x96000000\0"              \
> -       "kernel_size=0x2800000\0"
> +#define CONFIG_EXTRA_ENV_SETTINGS		\
> +	"verify=no\0"				\
> +	"fdt_high=0xffffffffffffffff\0"		\
> +	"initrd_high=0xffffffffffffffff\0"	\
> +	"fdt_addr=0x00f00000\0"			\
> +	"kernel_addr=0x01000000\0"		\
> +	"scriptaddr=0x80000000\0"		\
> +	"fdtheader_addr_r=0x80100000\0"		\
> +	"kernelheader_addr_r=0x80200000\0"	\
> +	"kernel_addr_r=0x96000000\0"		\
> +	"fdt_addr_r=0x90000000\0"		\
> +	"load_addr=0x96000000\0"		\
> +	"kernel_size=0x2800000\0"		\
> +	"console=ttyS0,115200\0"		\
> +	BOOTENV					\
> +	"boot_scripts=ls1012afrdm_boot.scr\0"	\
> +	"scan_dev_for_boot_part="		\
> +	     "part list ${devtype} ${devnum} devplist; "	\
> +	     "env exists devplist || setenv devplist 1; "	\
> +	     "for distro_bootpart in ${devplist}; do "		\
> +		  "if fstype ${devtype} "			\
> +		      "${devnum}:${distro_bootpart} "		\
> +		      "bootfstype; then "			\
> +		      "run scan_dev_for_boot; "	\
> +		  "fi; "			\
> +	      "done\0"				\
> +	"scan_dev_for_boot="				  \
> +		"echo Scanning ${devtype} "		  \
> +				"${devnum}:${distro_bootpart}...; "  \
> +		"for prefix in ${boot_prefixes}; do "	  \
> +			"run scan_dev_for_scripts; "	  \
> +		"done;"					  \
> +		"\0"					  \
> +	"installer=load usb 0:2 $load_addr "	\
> +		   "/flex_installer_arm64.itb; "	\
> +		   "bootm $load_addr#$board\0"	\
> +	"qspi_bootcmd=echo Trying load from qspi..;"	\
> +		"sf probe && sf read $load_addr "	\
> +		"$kernel_addr $kernel_size && bootm $load_addr#$board\0"
> +

http://patchwork.ozlabs.org/patch/808617/ changes
CONFIG_EXTRA_ENV_SETTINGS which you just redefined. Do you really depend
on that patch? That patch needs an update.

York



More information about the U-Boot mailing list