[U-Boot] [PATCH] disk: part_dos: Use the original allocation scheme for the SPL case

[Fabio Estevam]

Hi Jonathan,

On Thu, Oct 5, 2017 at 1:36 AM, Jonathan Gray <jsg at jsg.id.au> wrote:

> This does not seem to be a complete fix, cubox is still broken when
> U-Boot proper loads, unless the efi loader commits are to blame
> for introducing unaligned accesses.

I cannot reproduce the problem on mx6q cubox:

U-Boot SPL 2017.11-rc1-00101-gafbdfd8 (Oct 07 2017 - 14:41:16)
Trying to boot from MMC1


U-Boot 2017.11-rc1-00101-gafbdfd8 (Oct 07 2017 - 14:41:16 -0300)

CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
CPU:   Extended Commercial temperature grade (-20C to 105C) at 23C
Reset cause: POR
Board: MX6 Cubox-i
DRAM:  2 GiB
MMC:   FSL_SDHC: 0
No panel detected: default to HDMI
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial
Net:   FEC
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
336 bytes read in 70 ms (3.9 KiB/s)
## Executing script at 12000000
37669 bytes read in 69 ms (532.2 KiB/s)
6378872 bytes read in 361 ms (16.9 MiB/s)
## Flattened Device Tree blob at 18000000
   Booting using the fdt blob at 0x18000000
   Using Device Tree in place at 18000000, end 1800c324

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0