[U-Boot] fsl_esdhc driver is broken with DM

[Jagan Teki]

On Mon, Oct 2, 2017 at 4:36 PM, Fabio Estevam <festevam at gmail.com> wrote:
> Hi Jagan,
>
> On Mon, Oct 2, 2017 at 7:23 AM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
>
>> Yes, currently I'm using DM_MMC for U-Boot proper and recently I've
>> moved SPL as well [1].  But I've seen an issue with i.MX6UL while
>> moving to OF_SPL
>
> What exactly is the MX6UL issue you see?

I didn't dig much, but the i.MX6UL case has rebooting with DM_MMC for
both SPL and U-Boot proper.

Log:
-----
U-Boot SPL 2017.09-00371-ga81bf43 (Oct 09 2017 - 22:55:26)
Trying to boot from MMC1


U-Boot 2017.09-00371-ga81bf43 (Oct 09 2017 - 22:55:26 +0530)

CPU:   Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 33C
Reset cause: POR
Model: Engicam GEAM6UL
DRAM:  128 MiB

U-Boot SPL 2017.09-00371-ga81bf43 (Oct 09 2017 - 22:55:26)
Trying to boot from MMC1


U-Boot 2017.09-00371-ga81bf43 (Oct 09 2017 - 22:55:26 +0530)

CPU:   Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 36C
Reset cause: unknown reset
Model: Engicam GEAM6UL
DRAM:  128 MiB

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.