[U-Boot] [PATCH] Powerpc: Make pcie link state judge more specific

[Xiaowei Bao]

Hi York,

I will revise the commit message later.

Best regards
xiaowei

-----Original Message-----
From: York Sun 
Sent: Monday, October 09, 2017 11:44 PM
To: Xiaowei Bao <xiaowei.bao at nxp.com>; M.h. Lian <minghuan.lian at nxp.com>; Z.q. Hou <zhiqiang.hou at nxp.com>; Mingkai Hu <mingkai.hu at nxp.com>; u-boot at lists.denx.de
Subject: Re: [PATCH] Powerpc: Make pcie link state judge more specific

On 09/24/2017 08:44 PM, Bao Xiaowei wrote:
> For some special reset times for longer pcie devices, in this case, 
> the pcie device may on polling compliance state, the RC considers the 
> pcie device is link up, but the pcie device is not link up, only the 
> L0 state is link up state. So add the link up status judgement mechanisms.
> 
> Signed-off-by: Bao Xiaowei <xiaowei.bao at nxp.com>
> ---
> v2:
>  - Detailed function module
>  - Adjust the code structure
> 

Xiaowei,

Can you revise the commit message? I don't quite understand it. It is similar but not the same as the change you made for Layerscape, isn't it?

While you respin this patch, please consider my comments earlier.

York