[U-Boot] Broadwell-DE bare metal

[Zoran Stojsavljevic]

> What project are you doing currently for the investigation?

I did some E3900/APL-I investigation, back a year ago. Built Coreboot with
FSP 2.0, and used as payload SeaBIOS.

Did not like the methodology, especially if it comes to YOCTO via U-boot,
as payload. Does not sound correctly.

Now, I am doing some serious projects with ARM, U-Boot and YOCTO, but x86
stays still a mystery with the SEC + lower part od PEI (in other words FSP)
for Embedded/IoT.

Stays a mystery for years. For years I am trying to make some
viable/meaningful architecture while I worked with x86.

Nowadays, a i am in the same shoes as Andy, doing this investigation mostly
for myself. But this stays to be main obstacle with U-Boot. With IoTG
community, I should say.

Well... And I am really now having you on my radar, since the job you'll do
is not an easy one. And... Looking forward to read/experience more about
your x86 U-Boot bare metal porting.

Thank you for an effort,
Zoran

On Tue, Oct 10, 2017 at 7:08 AM, Bin Meng <bmeng.cn at gmail.com> wrote:

> Hi Zoran,
>
> On Tue, Oct 10, 2017 at 11:53 AM, Zoran Stojsavljevic
> <zoran.stojsavljevic at gmail.com> wrote:
> > Hello Bin,
> >
> > You understood me, seems, perfectly. And this is what I am talking about
> > here.
> >
> > The whole story told by Andy (Shevchenko) as RE: to my other thread does
> not
> > stand, just because of the booting times.
> >
> > But I need Andy's story (further) to investigate, and have currently no
> any
> > spare/free time. But I will later.
> >
> > And, BTW, you addressed me (wrongly). You should address Simon. To be
> > politically correct. ;-)
> >
>
> Please avoid top-posting..
>
> What project are you doing currently for the investigation?
>
> Regards,
> Bin
>