[U-Boot] [PATCH] Powerpc: Make pcie link state judge more specific
Mingkai Hu
mingkai.hu at nxp.com
Tue Oct 10 10:34:34 UTC 2017
> -----Original Message-----
> From: York Sun
> Sent: Tuesday, October 03, 2017 11:32 PM
> To: Xiaowei Bao <xiaowei.bao at nxp.com>; Mingkai Hu
> <mingkai.hu at nxp.com>
> Cc: u-boot at lists.denx.de
> Subject: Re: [PATCH] Powerpc: Make pcie link state judge more specific
>
> On 09/24/2017 08:44 PM, Bao Xiaowei wrote:
> > For some special reset times for longer pcie devices, in this case,
> > the pcie device may on polling compliance state, the RC considers the
> > pcie device is link up, but the pcie device is not link up, only the
> > L0 state is link up state. So add the link up status judgement mechanisms.
> >
> > Signed-off-by: Bao Xiaowei <xiaowei.bao at nxp.com>
> > ---
> > v2:
> > - Detailed function module
> > - Adjust the code structure
>
> Mingkai,
>
> Please ack if you agree with this change.
>
York,
I had discussion with xiaowei and also posted the comments on the patch.
Thanks,
Mingkai
More information about the U-Boot
mailing list