[U-Boot] [PATCH v4 2/2] sun50i: h5: Add NanoPi Neo Plus2 DT initial support
Jagan Teki
jagannadh.teki at gmail.com
Tue Oct 10 13:58:23 UTC 2017
On Tue, Oct 10, 2017 at 7:15 PM, Antony Antony <antony at phenome.org> wrote:
> Add initial DT for NanoPi NEO Plus2 by FriendlyARM
> - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU
> - 1 GB DDR3 RAM
> - 8GB eMMC flash (Samsung KLM8G1WEPD-B031)
> - micro SD card slot
> - Gigabit Ethernet (external RTL8211E-VB-CG chip)
> - 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module)
> - 2x USB 2.0 host ports
>
> Signed-off-by: Antony Antony <antony at phenome.org>
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts | 106 ++++++++++++++++++++++++++++
> configs/nanopi_neo_plus2_defconfig | 18 +++++
> 3 files changed, 125 insertions(+)
> create mode 100644 arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
> create mode 100644 configs/nanopi_neo_plus2_defconfig
> ---
> Changes v1->v2
> removed memory {}, compatible ="allwinner,sun5i-a13-mmc"
> remove CONFIG_SPL_SPI_FLASH_SUPPORT=y and CONFIG_SPL_SPI_SUNXI=y (no SPI)
> remove CONFIG_SD_BOOT=y
> Changes v2->v3
> removed compatible ="allwinner,sun50i-a64-mmc"
> Changes v3->v4
> removed compatible from mmc0
> add h5 & a64 compaitable to sun50i-h5.dtsi
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 5b90280..879ff24 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -335,6 +335,7 @@ dtb-$(CONFIG_MACH_SUN8I_V3S) += \
> sun8i-v3s-licheepi-zero.dtb
> dtb-$(CONFIG_MACH_SUN50I_H5) += \
> sun50i-h5-nanopi-neo2.dtb \
> + sun50i-h5-nanopi-neo-plus2.dtb \
> sun50i-h5-orangepi-pc2.dtb \
> sun50i-h5-orangepi-prime.dtb \
> sun50i-h5-orangepi-zero-plus2.dtb
> diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
> new file mode 100644
> index 0000000..f1406c2
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
> @@ -0,0 +1,106 @@
> +/*
> + * Copyright (C) 2017 Antony Antony <antony at phenome.org>
> + * Copyright (c) 2016 ARM Ltd.
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h5.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "FriendlyARM NanoPi NEO Plus 2";
> + compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + reg_vcc3v3: vcc3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
Does this tested? need to have in Linux first.
> +
> +&mmc0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
> + vmmc-supply = <®_vcc3v3>;
> + bus-width = <4>;
> + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> + status = "okay";
> +};
> +
> +&mmc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc2_8bit_pins>;
> + vmmc-supply = <®_vcc3v3>;
> + bus-width = <8>;
> + non-removable;
> + cap-mmc-hw-reset;
> + status = "okay";
> +};
> +
> +&ohci1 {
> + status = "okay";
> +};
Same comment like ehci1
thanks!
--
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
More information about the U-Boot
mailing list