[U-Boot] [PATCH v5 12/18] arm: mark save_boot_params_ret as a function

[Philipp Tomsich]

As no '.type' was set for save_boot_params_ret in start.S, binutils
did not track whether it was emitted as A32 or T32.  By properly
marking save_boot_params_ret as a potential function entry, we can
make sure that the compiler will insert the appropriate instructions
for branching to save_boot_params_ret both for call-sites emitted as
A32 and T32.

Reported-by: Andy Yan <andy.yan at rock-chips.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
Tested-by: Andy Yan <andy.yan at rock-chips.com>

---

Changes in v5: None
Changes in v4: None
Changes in v3:
- tracked the root-cause why no interwork branch was emitted and fixed
  it using a '.type'-directive in start.S to mark save_boot_params_ret
  as a (possible) function-entry.

Changes in v2: None

 arch/arm/cpu/armv7/start.S | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 7b84a7a..95a0b52 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -31,6 +31,7 @@
 
 	.globl	reset
 	.globl	save_boot_params_ret
+	.type   save_boot_params_ret,%function
 #ifdef CONFIG_ARMV7_LPAE
 	.global	switch_to_hypervisor_ret
 #endif
-- 
2.1.4