[U-Boot] [PATCH 2/2] mx6slevk: Remove some DM drivers

[Fabio Estevam]

While having DM driver is a good thing, currently this defconfig
is completely broken in a way that SD cards can not even be detected.

Remove some of the DM drivers to avoid the regression for now
and allow booting a kernel stored in the SD card again.

Re-adding the DM drivers can be revisited later.

Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
Applied on top of:

https://patchwork.ozlabs.org/patch/820477/

and

https://patchwork.ozlabs.org/patch/820298/

 configs/mx6slevk_defconfig | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig
index c876c6b..51735ec 100644
--- a/configs/mx6slevk_defconfig
+++ b/configs/mx6slevk_defconfig
@@ -3,7 +3,7 @@ CONFIG_ARCH_MX6=y
 CONFIG_TARGET_MX6SLEVK=y
 # CONFIG_CMD_BMODE is not set
 CONFIG_DEFAULT_DEVICE_TREE="imx6sl-evk"
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL,SYS_I2C"
 CONFIG_BOOTDELAY=3
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
@@ -29,21 +29,12 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM=y
 # CONFIG_BLK is not set
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_DM_MMC=y
 CONFIG_CMD_PART=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
-CONFIG_DM_PMIC=y
-CONFIG_DM_PMIC_PFUZE100=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_PFUZE100=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_DM_THERMAL=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
-- 
2.7.4