[U-Boot] [PATCH v3 19/20] arm: socfpga: Enable DDR working
tien.fong.chee at intel.com
tien.fong.chee at intel.com
Fri Oct 13 08:08:56 UTC 2017
From: Tien Fong Chee <tien.fong.chee at intel.com>
SPL configures DDR by programming peripheral raw binary file
and calibrating DDR.
Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
---
arch/arm/mach-socfpga/spl.c | 56 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/arch/arm/mach-socfpga/spl.c b/arch/arm/mach-socfpga/spl.c
index aba116d..6c9bf81 100644
--- a/arch/arm/mach-socfpga/spl.c
+++ b/arch/arm/mach-socfpga/spl.c
@@ -15,6 +15,7 @@
#include <asm/arch/system_manager.h>
#include <asm/arch/freeze_controller.h>
#include <asm/arch/clock_manager.h>
+#include <asm/arch/fpga_manager.h>
#include <asm/arch/misc.h>
#include <asm/arch/scan_manager.h>
#include <asm/arch/sdram.h>
@@ -22,6 +23,10 @@
#include <asm/arch/nic301.h>
#include <asm/sections.h>
#include <fdtdec.h>
+#include <fat.h>
+#include <fs.h>
+#include <linux/ctype.h>
+#include <mmc.h>
#include <watchdog.h>
#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
#include <asm/arch/pinmux.h>
@@ -29,6 +34,9 @@
DECLARE_GLOBAL_DATA_PTR;
+#define BSIZE 4096
+#define PERIPH_RBF 0
+
#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
static struct pl310_regs *const pl310 =
(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
@@ -197,6 +205,12 @@ void board_init_f(ulong dummy)
#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
void spl_board_init(void)
{
+ int rval = 0;
+ int len = 0;
+ u32 buffer[BSIZE] __aligned(ARCH_DMA_MINALIGN);
+ struct spl_boot_device bootdev;
+ fpga_fs_info fpga_fsinfo;
+
/* configuring the clock based on handoff */
cm_basic_init(gd->fdt_blob);
WATCHDOG_RESET();
@@ -214,6 +228,48 @@ void spl_board_init(void)
/* Add device descriptor to FPGA device table */
socfpga_fpga_add();
+
+ bootdev.boot_device = spl_boot_device();
+
+ if (BOOT_DEVICE_MMC1 == bootdev.boot_device) {
+ struct mmc *mmc = NULL;
+ int err = 0;
+
+ spl_mmc_find_device(&mmc, bootdev.boot_device);
+
+ err = mmc_init(mmc);
+
+ if (err) {
+#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
+ printf("spl: mmc init failed with error: %d\n", err);
+#endif
+ return;
+ }
+
+ fpga_fsinfo.interface = "mmc";
+ fpga_fsinfo.fstype = FS_TYPE_FAT;
+ }
+
+ fpga_fsinfo.dev_part = (char *)get_cff_devpart(gd->fdt_blob,
+ &len);
+
+ fpga_fsinfo.filename = (char *)get_cff_filename(gd->fdt_blob,
+ &len,
+ PERIPH_RBF);
+
+ /* Program peripheral RBF */
+ if (fpga_fsinfo.filename)
+ rval = fpga_fsload(0, buffer, BSIZE, &fpga_fsinfo);
+ else {
+ printf("Failed to find peripheral RBF file from DTS\n");
+ return;
+ }
+
+ if (!rval) {
+ config_pins(gd->fdt_blob, "shared");
+
+ ddr_calibration_sequence();
+ }
}
void board_init_f(ulong dummy)
--
2.2.0
More information about the U-Boot
mailing list