[U-Boot] [PATCH 08/20] i2c: uniphier: replace debug() with dev_dbg()
Masahiro Yamada
yamada.masahiro at socionext.com
Fri Oct 13 10:21:57 UTC 2017
Use dev_dbg() functions. It will be helpful to prefix log messages
with the corresponding device name when the core framework is ready.
While I am here, I renamed "dev", which was actually private data,
into "priv" because dev->dev looks confusing.
Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---
drivers/i2c/i2c-uniphier.c | 63 ++++++++++++++++++++++++----------------------
1 file changed, 33 insertions(+), 30 deletions(-)
diff --git a/drivers/i2c/i2c-uniphier.c b/drivers/i2c/i2c-uniphier.c
index 3412e2a..0f2734e 100644
--- a/drivers/i2c/i2c-uniphier.c
+++ b/drivers/i2c/i2c-uniphier.c
@@ -6,14 +6,14 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <common.h>
-#include <dm.h>
-#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
#include <linux/io.h>
#include <linux/sizes.h>
-#include <linux/errno.h>
-#include <i2c.h>
+#include <linux/types.h>
+#include <dm.h>
#include <fdtdec.h>
+#include <i2c.h>
struct uniphier_i2c_regs {
u32 dtrm; /* data transmission */
@@ -38,7 +38,8 @@ struct uniphier_i2c_regs {
#define IOBUS_FREQ 100000000
-struct uniphier_i2c_dev {
+struct uniphier_i2c_priv {
+ struct udevice *dev;
struct uniphier_i2c_regs __iomem *regs; /* register base */
unsigned long input_clk; /* master clock (Hz) */
unsigned long wait_us; /* wait for every byte transfer (us) */
@@ -47,7 +48,7 @@ struct uniphier_i2c_dev {
static int uniphier_i2c_probe(struct udevice *dev)
{
fdt_addr_t addr;
- struct uniphier_i2c_dev *priv = dev_get_priv(dev);
+ struct uniphier_i2c_priv *priv = dev_get_priv(dev);
addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
@@ -59,15 +60,17 @@ static int uniphier_i2c_probe(struct udevice *dev)
priv->input_clk = IOBUS_FREQ;
+ priv->dev = dev;
+
/* deassert reset */
writel(0x3, &priv->regs->brst);
return 0;
}
-static int send_and_recv_byte(struct uniphier_i2c_dev *dev, u32 dtrm)
+static int send_and_recv_byte(struct uniphier_i2c_priv *priv, u32 dtrm)
{
- writel(dtrm, &dev->regs->dtrm);
+ writel(dtrm, &priv->regs->dtrm);
/*
* This controller only provides interruption to inform the completion
@@ -75,72 +78,72 @@ static int send_and_recv_byte(struct uniphier_i2c_dev *dev, u32 dtrm)
* Unfortunately, U-Boot does not have a good support of interrupt.
* Wait for a while.
*/
- udelay(dev->wait_us);
+ udelay(priv->wait_us);
- return readl(&dev->regs->drec);
+ return readl(&priv->regs->drec);
}
-static int send_byte(struct uniphier_i2c_dev *dev, u32 dtrm, bool *stop)
+static int send_byte(struct uniphier_i2c_priv *priv, u32 dtrm, bool *stop)
{
int ret = 0;
u32 drec;
- drec = send_and_recv_byte(dev, dtrm);
+ drec = send_and_recv_byte(priv, dtrm);
if (drec & I2C_DREC_LAB) {
- debug("uniphier_i2c: bus arbitration failed\n");
+ dev_dbg(priv->dev, "uniphier_i2c: bus arbitration failed\n");
*stop = false;
ret = -EREMOTEIO;
}
if (drec & I2C_DREC_LRB) {
- debug("uniphier_i2c: slave did not return ACK\n");
+ dev_dbg(priv->dev, "uniphier_i2c: slave did not return ACK\n");
ret = -EREMOTEIO;
}
return ret;
}
-static int uniphier_i2c_transmit(struct uniphier_i2c_dev *dev, uint addr,
+static int uniphier_i2c_transmit(struct uniphier_i2c_priv *priv, uint addr,
uint len, const u8 *buf, bool *stop)
{
int ret;
- debug("%s: addr = %x, len = %d\n", __func__, addr, len);
+ dev_dbg(priv->dev, "%s: addr = %x, len = %d\n", __func__, addr, len);
- ret = send_byte(dev, I2C_DTRM_STA | I2C_DTRM_NACK | addr << 1, stop);
+ ret = send_byte(priv, I2C_DTRM_STA | I2C_DTRM_NACK | addr << 1, stop);
if (ret < 0)
goto fail;
while (len--) {
- ret = send_byte(dev, I2C_DTRM_NACK | *buf++, stop);
+ ret = send_byte(priv, I2C_DTRM_NACK | *buf++, stop);
if (ret < 0)
goto fail;
}
fail:
if (*stop)
- writel(I2C_DTRM_STO | I2C_DTRM_NACK, &dev->regs->dtrm);
+ writel(I2C_DTRM_STO | I2C_DTRM_NACK, &priv->regs->dtrm);
return ret;
}
-static int uniphier_i2c_receive(struct uniphier_i2c_dev *dev, uint addr,
+static int uniphier_i2c_receive(struct uniphier_i2c_priv *priv, uint addr,
uint len, u8 *buf, bool *stop)
{
int ret;
- debug("%s: addr = %x, len = %d\n", __func__, addr, len);
+ dev_dbg(priv->dev, "%s: addr = %x, len = %d\n", __func__, addr, len);
- ret = send_byte(dev, I2C_DTRM_STA | I2C_DTRM_NACK |
+ ret = send_byte(priv, I2C_DTRM_STA | I2C_DTRM_NACK |
I2C_DTRM_RD | addr << 1, stop);
if (ret < 0)
goto fail;
while (len--)
- *buf++ = send_and_recv_byte(dev, len ? 0 : I2C_DTRM_NACK);
+ *buf++ = send_and_recv_byte(priv, len ? 0 : I2C_DTRM_NACK);
fail:
if (*stop)
- writel(I2C_DTRM_STO | I2C_DTRM_NACK, &dev->regs->dtrm);
+ writel(I2C_DTRM_STO | I2C_DTRM_NACK, &priv->regs->dtrm);
return ret;
}
@@ -149,7 +152,7 @@ static int uniphier_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
int nmsgs)
{
int ret = 0;
- struct uniphier_i2c_dev *dev = dev_get_priv(bus);
+ struct uniphier_i2c_priv *priv = dev_get_priv(bus);
bool stop;
for (; nmsgs > 0; nmsgs--, msg++) {
@@ -157,10 +160,10 @@ static int uniphier_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
stop = nmsgs > 1 && msg[1].flags & I2C_M_RD ? false : true;
if (msg->flags & I2C_M_RD)
- ret = uniphier_i2c_receive(dev, msg->addr, msg->len,
+ ret = uniphier_i2c_receive(priv, msg->addr, msg->len,
msg->buf, &stop);
else
- ret = uniphier_i2c_transmit(dev, msg->addr, msg->len,
+ ret = uniphier_i2c_transmit(priv, msg->addr, msg->len,
msg->buf, &stop);
if (ret < 0)
@@ -172,7 +175,7 @@ static int uniphier_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
static int uniphier_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
{
- struct uniphier_i2c_dev *priv = dev_get_priv(bus);
+ struct uniphier_i2c_priv *priv = dev_get_priv(bus);
/* max supported frequency is 400 kHz */
if (speed > 400000)
@@ -211,6 +214,6 @@ U_BOOT_DRIVER(uniphier_i2c) = {
.id = UCLASS_I2C,
.of_match = uniphier_i2c_of_match,
.probe = uniphier_i2c_probe,
- .priv_auto_alloc_size = sizeof(struct uniphier_i2c_dev),
+ .priv_auto_alloc_size = sizeof(struct uniphier_i2c_priv),
.ops = &uniphier_i2c_ops,
};
--
2.7.4
More information about the U-Boot
mailing list