[U-Boot] [PATCH] ARC: HSDK: introduce CREG GPIO driver

[Tom Rini]

On Fri, Oct 13, 2017 at 01:55:28PM +0000, Alexey Brodkin wrote:
> Hi Tom,
> 
> On Fri, 2017-10-13 at 09:46 -0400, Tom Rini wrote:
> > On Fri, Oct 13, 2017 at 01:33:22PM +0000, Alexey Brodkin wrote:
> > > 
> > > Hi Tom,
> > > 
> > > On Fri, 2017-10-13 at 16:21 +0300, Eugeniy Paltsev wrote:
> > > > 
> > > > The HSDK can manage some pins via CREG registers block.
> > > > 
> > > > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
> > > > ---
> > > >  MAINTAINERS                   |   6 +++
> > > >  drivers/gpio/Kconfig          |   7 +++
> > > >  drivers/gpio/Makefile         |   1 +
> > > >  drivers/gpio/hsdk-creg-gpio.c | 109 ++++++++++++++++++++++++++++++++++++++++++
> > > >  4 files changed, 123 insertions(+)
> > > >  create mode 100644 drivers/gpio/hsdk-creg-gpio.c
> > > 
> > > I'm wondering if this one should go through my tree as this
> > > is for one of our Synopsys ARC devboards or GPIO stuff usually
> > > goes through some other tree?
> > 
> > The ARC tree is fine, but it's a bit late posting for this release.
> 
> So should I keep this one in "next" branch of my tree before v2017.11
> gets cut?

Yes, thanks.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20171013/5cc2ff52/attachment.sig>