[U-Boot] [PATCH] cmd:fastboot:Kconfig Enable FASTBOOT_FLASH_NAND for SUNXI_NAND devices
Benjamin Young
benjaminzyoung at gmail.com
Fri Oct 13 21:29:20 UTC 2017
Encountered an issue where fastboot can't write to NAND on a CHIP_pro,
the symbol was neither present in the board's config header, nor the
Kconfig, this patch puts it in the Kconfig and defaults on when
SUNXI_NAND is selected.
Signed-off-by: Ben Young <computermouth at crunchbangplusplus.org>
---
cmd/fastboot/Kconfig | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/cmd/fastboot/Kconfig b/cmd/fastboot/Kconfig
index 214bbc23fc..a2afb809bb 100644
--- a/cmd/fastboot/Kconfig
+++ b/cmd/fastboot/Kconfig
@@ -81,6 +81,15 @@ config FASTBOOT_FLASH_MMC_DEV
regarding the non-volatile storage device. Define this to
the eMMC device that fastboot should use to store the image.
+config FASTBOOT_FLASH_NAND_DEV
+ int "Define FASTBOOT NAND FLASH default device"
+ depends on FASTBOOT_FLASH && NAND
+ default 0 if ARCH_SUNXI && NAND_SUNXI
+ help
+ The fastboot "flash" command requires additional information
+ regarding the non-volatile storage device. Define this to
+ the NAND device that fastboot should use to store the image.
+
config FASTBOOT_GPT_NAME
string "Target name for updating GPT"
depends on FASTBOOT_FLASH
--
2.11.0
More information about the U-Boot
mailing list