[U-Boot] [RFC] mmc: fsl_esdhc: Do not set high speed mode on MX25 and MX51

[Fabio Estevam]

On Thu, Oct 19, 2017 at 10:46 AM, Otavio Salvador
<otavio.salvador at ossystems.com.br> wrote:

> I think the original RFC is better as workaround as it solves the
> issue for other boards. This does not mean we shouldn't fix the root
> cause ...

Actually I don't know if this issue happens with other mx25/mx51 boards.

Benoit says his mx25 board can operate with high speed SD card in a
modified version of U-Boot.
I asked him if he could test his board with mainline U-Boot instead
for comparison.