[U-Boot] [PATCH 0/4] net: phy: Add Broadcom BCM53xx switch driver

[Florian Fainelli]

On 10/14/2017 06:00 PM, Florian Fainelli wrote:
> (this time after subscribing to the list)
> 
> Hi all,
> 
> This patch series adds support for the Broadcom BCM53xx switches, in particular
> BCM53125 which is found no the Lamobo R1 board.

Thanks Stefan for the review. I suppose Joe should now queue those up,
provided that he is happy with the patches and then submit a pull request?

> 
> The driver is largely based on the DSA/b53 driver Linux driver and only
> incorporates what is necessary to succesfully bring-up all ports (including the
> management port) for boot over the network:
> 
> => dhcp
> dw_adjust_link: Speed: 1000, full duplex
> BOOTP broadcast 1
> DHCP client bound to address 192.168.0.11 (3 ms)
> Using ethernet at 01c50000 device
> TFTP from server 192.168.0.1; our IP address is 192.168.0.11
> Filename 'sun7i-a20-lamobo-r1-kernel.bin'.
> Load address: 0x42000000
> Loading: #################################################################
>          #################################################################
>          ################################
>          11.6 MiB/s
> done
> Bytes transferred = 2371552 (242fe0 hex)
> => 
> 
> 
> Florian Fainelli (4):
>   net: phy: Add Broadcom BCM53xx switch driver
>   net: designware: Pad small packets
>   net: phy: b53: Add b53_reg read/write commands
>   configs: Update Lamobo_R1 with B53 switch options
> 
>  configs/Lamobo_R1_defconfig |   3 +
>  drivers/net/designware.c    |   4 +
>  drivers/net/phy/Kconfig     |  14 +
>  drivers/net/phy/Makefile    |   1 +
>  drivers/net/phy/b53.c       | 767 ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/net/phy/phy.c       |   3 +
>  include/phy.h               |   1 +
>  7 files changed, 793 insertions(+)
>  create mode 100644 drivers/net/phy/b53.c
> 


-- 
Florian