[U-Boot] [PATCH v3 16/20] arm: socfpga: Adding clock frequency info for U-boot
Chee, Tien Fong
tien.fong.chee at intel.com
Mon Oct 23 08:02:47 UTC 2017
On Jum, 2017-10-20 at 09:29 -0500, Dinh Nguyen wrote:
>
> On 10/13/2017 03:08 AM, tien.fong.chee at intel.com wrote:
> >
> > From: Tien Fong Chee <tien.fong.chee at intel.com>
> >
> > Clock frequency info is required in U-boot.
> We know this patch is for U-Boot, don't need to state it in the
> commit
> message. Also, it's "U-Boot", not "U-boot".
>
Both SPL and U-Boot need to know the clock freq info. SPL already has
one, and this patch is for creating the clock freq info for U-Boot.
> >
> >
> > Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
> > ---
> > arch/arm/mach-socfpga/board.c | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach-
> > socfpga/board.c
> > index 965f9dc..9a96f52 100644
> > --- a/arch/arm/mach-socfpga/board.c
> > +++ b/arch/arm/mach-socfpga/board.c
> > @@ -8,7 +8,10 @@
> >
> > #include <common.h>
> > #include <errno.h>
> > +#include <fdtdec.h>
> > #include <asm/arch/reset_manager.h>
> > +#include <asm/arch/clock_manager.h>
> > +#include <asm/arch/misc.h>
> Is misc.h needed?
>
I believe can remove mish.h . I will verify again.
> >
> > #include <asm/io.h>
> >
> > #include <usb.h>
> > @@ -26,6 +29,11 @@ int board_init(void)
> > /* Address of boot parameters for ATAG (if ATAG is used)
> > */
> > gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
> >
> > +#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> > + /* configuring the clock based on handoff */
> > + cm_basic_init(gd->fdt_blob);
> > +#endif
> > +
> Is is the right place this? The usual call is in the SPL.
>
SPL has one. This is for U-Boot. Clock freq info which is stored in SPL
memory will gone after moving to U-Boot.
> Dinh
More information about the U-Boot
mailing list