[U-Boot] [PATCH v3 17/20] arm: socfpga: Adding SoCFPGA info for both SPL and U-boot

Chee, Tien Fong tien.fong.chee at intel.com
Mon Oct 23 08:13:51 UTC 2017


On Jum, 2017-10-20 at 09:33 -0500, Dinh Nguyen wrote:
> 
> On 10/13/2017 03:08 AM, tien.fong.chee at intel.com wrote:
> > 
> > From: Tien Fong Chee <tien.fong.chee at intel.com>
> > 
> > SoC FPGA info is required in both SPL and U-boot.
> s/SoC FPGA/SocFPGA to be consistent.
> 
> s/U-boot/U-Boot
> 
Okay.
> > 
> > 
> > Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
> > ---
> >  arch/arm/mach-socfpga/board.c        | 3 +++
> >  arch/arm/mach-socfpga/misc_arria10.c | 5 -----
> >  arch/arm/mach-socfpga/spl.c          | 6 ++++++
> >  3 files changed, 9 insertions(+), 5 deletions(-)
> > 
> > diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach-
> > socfpga/board.c
> > index 9a96f52..7beb347 100644
> > --- a/arch/arm/mach-socfpga/board.c
> > +++ b/arch/arm/mach-socfpga/board.c
> > @@ -32,6 +32,9 @@ int board_init(void)
> >  #if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> >  	/* configuring the clock based on handoff */
> >  	cm_basic_init(gd->fdt_blob);
> > +
> > +	/* Add device descriptor to FPGA device table */
> > +	socfpga_fpga_add();
> >  #endif
> >  
> >  	return 0;
> > diff --git a/arch/arm/mach-socfpga/misc_arria10.c b/arch/arm/mach-
> > socfpga/misc_arria10.c
> > index 9d751f6..8760ac9 100644
> > --- a/arch/arm/mach-socfpga/misc_arria10.c
> > +++ b/arch/arm/mach-socfpga/misc_arria10.c
> > @@ -94,11 +94,6 @@ int arch_early_init_r(void)
> >  	/* assert reset to all except L4WD0 and L4TIMER0 */
> >  	socfpga_per_reset_all();
> >  
> > -	/* configuring the clock based on handoff */
> > -	/* TODO: Add call to cm_basic_init() */
> > -
> > -	/* Add device descriptor to FPGA device table */
> > -	socfpga_fpga_add();
> Why remove it from here?
> 
Initially, this is only created for SPL. Until U-Boot enable
development phase, i realized this also required by U-boot. So i
duplicated socfpga_fpga_add in both SPL(spl.c - below) and U-
Boot(board.c - above).
> > 
> >  	return 0;
> >  }
> >  #else
> > diff --git a/arch/arm/mach-socfpga/spl.c b/arch/arm/mach-
> > socfpga/spl.c
> > index 71bae82..aba116d 100644
> > --- a/arch/arm/mach-socfpga/spl.c
> > +++ b/arch/arm/mach-socfpga/spl.c
> > @@ -15,6 +15,7 @@
> >  #include <asm/arch/system_manager.h>
> >  #include <asm/arch/freeze_controller.h>
> >  #include <asm/arch/clock_manager.h>
> > +#include <asm/arch/misc.h>
> >  #include <asm/arch/scan_manager.h>
> >  #include <asm/arch/sdram.h>
> >  #include <asm/arch/scu.h>
> > @@ -208,6 +209,11 @@ void spl_board_init(void)
> >  
> >  	/* enable console uart printing */
> >  	preloader_console_init();
> > +
> > +	WATCHDOG_RESET();
> > +
> > +	/* Add device descriptor to FPGA device table */
> > +	socfpga_fpga_add();
> And add here?
> 
Refer to my comment above.
> Dinh


More information about the U-Boot mailing list