[U-Boot] [GIT PULL] Please pull u-boot-mmc master
Jaehoon Chung
jh80.chung at samsung.com
Tue Oct 24 07:58:51 UTC 2017
Dear Tom,
On 10/23/2017 01:54 PM, Jaehoon Chung wrote:
> Dear Tom,
>
> Could you pull these patches to u-boot/master?
> To develop the supporting HS200 mode, each host driver also needs to implement something.
> First step is the applying JJ's patches.
Discard this PR. After checking more, i will resend the PR.
Best Regards,
Jaehoon Chung
>
> If there is a problem, let me know, plz.
>
> The following changes since commit 0def58f7fd26a237bb08cfbd58ec53372b1ad06b:
>
> Merge git://git.denx.de/u-boot-x86 (2017-10-19 11:19:38 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mmc.git master
>
> for you to fetch changes up to f58da60cfdbe896d62a0ec61cd41a52cfc82c526:
>
> mmc: replace the printf() instead of error() (2017-10-23 13:48:39 +0900)
>
> ----------------------------------------------------------------
> Jaehoon Chung (1):
> mmc: replace the printf() instead of error()
>
> Jean-Jacques Hiblot (17):
> mmc: dm: get the IO-line and main voltage regulators from the dts
> mmc: split mmc_startup()
> mmc: move the MMC startup for version above v4.0 in a separate function
> mmc: make ext_csd part of struct mmc
> mmc: add a function to read and test the ext csd (mmc >= 4)
> mmc: introduce mmc modes
> mmc: Add a function to dump the mmc capabilities
> mmc: use mmc modes to select the correct bus speed
> cmd: mmc: display the mode name and current bus speed in the mmc info
> mmc: refactor SD startup to make it easier to support new modes
> mmc: refactor MMC startup to make it easier to support new modes
> mmc: Add a new callback function to perform the 74 clocks cycle sequence
> mmc: Add support for UHS modes
> mmc: disable UHS modes if Vcc cannot be switched on and off
> mmc: Change mode when switching to a boot partition
> mmc: use the right voltage level for MMC DDR and HS200 modes
> mmc: add a library function to send tuning command
>
> Kishon Vijay Abraham I (9):
> mmc: make mmc_set_ios() return status
> mmc: Enable signal voltage to be selected from mmc core
> mmc: add power cyle support in mmc core
> mmc: add a new mmc parameter to disable mmc clock
> mmc: disable the mmc clock during power off
> mmc: Add a execute_tuning() callback to the mmc operations.
> mmc: add HS200 support in MMC core
> mmc: Retry some MMC cmds on failure
> dm: mmc: Add a library function to parse generic dt binding
>
> Suniel Mahesh (2):
> drivers: mmc: Change buffer type in ALLOC_CACHE_ALIGN_BUFFER macro
> drivers: mmc: Avoid memory leak in case of failure
>
> cmd/mmc.c | 3 +-
> drivers/mmc/Kconfig | 23 +
> drivers/mmc/exynos_dw_mmc.c | 3 +
> drivers/mmc/fsl_esdhc.c | 2 +-
> drivers/mmc/mmc-uclass.c | 87 +++
> drivers/mmc/mmc.c | 1517 ++++++++++++++++++++++++++++++++-----------
> include/mmc.h | 176 ++++-
> 7 files changed, 1423 insertions(+), 388 deletions(-)
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
>
More information about the U-Boot
mailing list