[U-Boot] [PATCH v4 5/5] sunxi: video: add LCD support to DE2 driver

Vasily Khoruzhick anarsoul at gmail.com
Fri Oct 27 04:51:52 UTC 2017


Extend DE2 driver with LCD support. Tested on Pinebook which is based
on A64 and has ANX6345 eDP bridge with eDP panel connected to it.

Signed-off-by: Vasily Khoruzhick <anarsoul at gmail.com>
---
v4: - adapted to v4 changes in patch 4/5
v3: - rebased and fixed checkpatch errors/warnings

v2: - drop redundant clock_set_pll10() call
    - fallback to timings from DT if reading EDID from bridge failed
    - read panel_bpp from DT
 arch/arm/mach-sunxi/Kconfig     |   2 +-
 drivers/video/sunxi/Makefile    |   2 +-
 drivers/video/sunxi/sunxi_de2.c |  17 +++++
 drivers/video/sunxi/sunxi_lcd.c | 152 ++++++++++++++++++++++++++++++++++++++++
 4 files changed, 171 insertions(+), 2 deletions(-)
 create mode 100644 drivers/video/sunxi/sunxi_lcd.c

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 2309f59999..06d697e3a7 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -680,7 +680,7 @@ config VIDEO_LCD_MODE
 
 config VIDEO_LCD_DCLK_PHASE
 	int "LCD panel display clock phase"
-	depends on VIDEO
+	depends on VIDEO || DM_VIDEO
 	default 1
 	---help---
 	Select LCD panel display clock phase shift, range 0-3.
diff --git a/drivers/video/sunxi/Makefile b/drivers/video/sunxi/Makefile
index 0d64c2021f..8c91766c24 100644
--- a/drivers/video/sunxi/Makefile
+++ b/drivers/video/sunxi/Makefile
@@ -6,4 +6,4 @@
 #
 
 obj-$(CONFIG_VIDEO_SUNXI) += sunxi_display.o lcdc.o tve_common.o ../videomodes.o
-obj-$(CONFIG_VIDEO_DE2) += sunxi_de2.o sunxi_dw_hdmi.o lcdc.o ../dw_hdmi.o
+obj-$(CONFIG_VIDEO_DE2) += sunxi_de2.o sunxi_dw_hdmi.o lcdc.o ../dw_hdmi.o sunxi_lcd.o
diff --git a/drivers/video/sunxi/sunxi_de2.c b/drivers/video/sunxi/sunxi_de2.c
index ee67764ac5..49c36b8d73 100644
--- a/drivers/video/sunxi/sunxi_de2.c
+++ b/drivers/video/sunxi/sunxi_de2.c
@@ -232,6 +232,23 @@ static int sunxi_de2_probe(struct udevice *dev)
 	if (!(gd->flags & GD_FLG_RELOC))
 		return 0;
 
+	ret = uclass_find_device_by_name(UCLASS_DISPLAY,
+					 "sunxi_lcd", &disp);
+	if (!ret) {
+		int mux;
+
+		mux = 0;
+
+		ret = sunxi_de2_init(dev, plat->base, VIDEO_BPP32, disp, mux,
+				     false);
+		if (!ret) {
+			video_set_flush_dcache(dev, 1);
+			return 0;
+		}
+	}
+
+	debug("%s: lcd display not found (ret=%d)\n", __func__, ret);
+
 	ret = uclass_find_device_by_name(UCLASS_DISPLAY,
 					 "sunxi_dw_hdmi", &disp);
 	if (!ret) {
diff --git a/drivers/video/sunxi/sunxi_lcd.c b/drivers/video/sunxi/sunxi_lcd.c
new file mode 100644
index 0000000000..2f51aebe27
--- /dev/null
+++ b/drivers/video/sunxi/sunxi_lcd.c
@@ -0,0 +1,152 @@
+/*
+ * Allwinner LCD driver
+ *
+ * (C) Copyright 2017 Vasily Khoruzhick <anarsoul at gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <display.h>
+#include <video_bridge.h>
+#include <backlight.h>
+#include <dm.h>
+#include <edid.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/lcdc.h>
+#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
+
+struct sunxi_lcd_priv {
+	struct display_timing timing;
+	int panel_bpp;
+};
+
+static void sunxi_lcdc_config_pinmux(void)
+{
+#ifdef CONFIG_MACH_SUN50I
+	int pin;
+
+	for (pin = SUNXI_GPD(0); pin <= SUNXI_GPD(21); pin++) {
+		sunxi_gpio_set_cfgpin(pin, SUNXI_GPD_LCD0);
+		sunxi_gpio_set_drv(pin, 3);
+	}
+#endif
+}
+
+static int sunxi_lcd_enable(struct udevice *dev, int bpp,
+			    const struct display_timing *edid)
+{
+	struct sunxi_ccm_reg * const ccm =
+	       (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	struct sunxi_lcdc_reg * const lcdc =
+	       (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
+	struct sunxi_lcd_priv *priv = dev_get_priv(dev);
+	struct udevice *backlight;
+	int clk_div, clk_double, ret;
+
+	/* Reset off */
+	setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD0);
+	/* Clock on */
+	setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD0);
+
+	lcdc_init(lcdc);
+	sunxi_lcdc_config_pinmux();
+	lcdc_pll_set(ccm, 0, edid->pixelclock.typ / 1000,
+		     &clk_div, &clk_double, false);
+	lcdc_tcon0_mode_set(lcdc, edid, clk_div, false,
+			    priv->panel_bpp, CONFIG_VIDEO_LCD_DCLK_PHASE);
+	lcdc_enable(lcdc, priv->panel_bpp);
+
+	ret = uclass_get_device(UCLASS_PANEL_BACKLIGHT, 0, &backlight);
+	if (!ret)
+		backlight_enable(backlight);
+
+	return 0;
+}
+
+static int sunxi_lcd_read_timing(struct udevice *dev,
+				 struct display_timing *timing)
+{
+	struct sunxi_lcd_priv *priv = dev_get_priv(dev);
+
+	memcpy(timing, &priv->timing, sizeof(struct display_timing));
+
+	return 0;
+}
+
+static int sunxi_lcd_probe(struct udevice *dev)
+{
+	struct udevice *cdev;
+	struct sunxi_lcd_priv *priv = dev_get_priv(dev);
+	int ret;
+	int node, timing_node, val;
+
+#ifdef CONFIG_VIDEO_BRIDGE
+	/* Try to get timings from bridge first */
+	ret = uclass_get_device(UCLASS_VIDEO_BRIDGE, 0, &cdev);
+	if (!ret) {
+		u8 edid[EDID_SIZE];
+		int channel_bpp;
+
+		ret = video_bridge_attach(cdev);
+		if (ret) {
+			debug("video bridge attach failed: %d\n", ret);
+			return ret;
+		}
+		ret = video_bridge_read_edid(cdev, edid, EDID_SIZE);
+		if (ret > 0) {
+			ret = edid_get_timing(edid, ret,
+					      &priv->timing, &channel_bpp);
+			priv->panel_bpp = channel_bpp * 3;
+			if (!ret)
+				return ret;
+		}
+	}
+#endif
+
+	/* Fallback to timings from DT if there's no bridge or
+	 * if reading EDID failed
+	 */
+	ret = uclass_get_device(UCLASS_PANEL, 0, &cdev);
+	if (ret) {
+		debug("video panel not found: %d\n", ret);
+		return ret;
+	}
+
+	if (fdtdec_decode_display_timing(gd->fdt_blob, dev_of_offset(cdev),
+					 0, &priv->timing)) {
+		debug("%s: Failed to decode display timing\n", __func__);
+		return -EINVAL;
+	}
+	timing_node = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(cdev),
+					 "display-timings");
+	node = fdt_first_subnode(gd->fdt_blob, timing_node);
+	val = fdtdec_get_int(gd->fdt_blob, node, "bits-per-pixel", -1);
+	if (val != -1)
+		priv->panel_bpp = val;
+	else
+		priv->panel_bpp = 18;
+
+	return 0;
+}
+
+static const struct dm_display_ops sunxi_lcd_ops = {
+	.read_timing = sunxi_lcd_read_timing,
+	.enable = sunxi_lcd_enable,
+};
+
+U_BOOT_DRIVER(sunxi_lcd) = {
+	.name   = "sunxi_lcd",
+	.id     = UCLASS_DISPLAY,
+	.ops    = &sunxi_lcd_ops,
+	.probe  = sunxi_lcd_probe,
+	.priv_auto_alloc_size = sizeof(struct sunxi_lcd_priv),
+};
+
+#ifdef CONFIG_MACH_SUN50I
+U_BOOT_DEVICE(sunxi_lcd) = {
+	.name = "sunxi_lcd"
+};
+#endif
-- 
2.14.3



More information about the U-Boot mailing list