[U-Boot] [Patch V2 1/2] armv8: ls1088ardb: Add SCSI related configs in header file for RDB

[Ashish Kumar]

-----Original Message-----
From: York Sun 
Sent: Tuesday, October 31, 2017 12:37 AM
To: Ashish Kumar <ashish.kumar at nxp.com>; u-boot at lists.denx.de
Cc: Amrita Kumari <amrita.kumari at nxp.com>
Subject: Re: [Patch V2 1/2] armv8: ls1088ardb: Add SCSI related configs in header file for RDB

On 10/30/2017 12:06 PM, York Sun wrote:
> On 10/29/2017 11:40 PM, Ashish Kumar wrote:
>> Signed-off-by: Amrita Kumari <amrita.kumari at nxp.com>
>> Signed-off-by: Ashish Kumar <Ashish.Kumar at nxp.com>
>> ---
> 
> Change log?
> 
>>  include/configs/ls1088ardb.h | 13 +++++++++++++
>>  1 file changed, 13 insertions(+)
>>
>> diff --git a/include/configs/ls1088ardb.h 
>> b/include/configs/ls1088ardb.h index 958d472..8fdc576 100644
>> --- a/include/configs/ls1088ardb.h
>> +++ b/include/configs/ls1088ardb.h
>> @@ -293,6 +293,19 @@
>>  #define CONFIG_PHY_GIGE
>>  #endif
>>  
>> +/* SATA */
>> +#define CONFIG_LIBATA
>> +#define CONFIG_SCSI_AHCI
>> +#define CONFIG_SCSI_AHCI_PLAT
>> +#define CONFIG_CMD_SCSI
>> +#define CONFIG_SCSI
>> +#define CONFIG_SYS_SATA1		AHCI_BASE_ADDR1
>> +
>> +#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
>> +#define CONFIG_SYS_SCSI_MAX_LUN		1
>> +#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
>> +					CONFIG_SYS_SCSI_MAX_LUN)
>> +
>>  /*  MMC  */
>>  #ifdef CONFIG_MMC
>>  #define CONFIG_FSL_ESDHC
>>
> 
> Please check my comments to your first version. It still applied.

Sorry, my bad. My comment was on the patch submitted by Andy Tang. You both changed the same. Please work together to update the patches.

As discussed with Andy, I will send next version. Andy to supersede his patch set.

Regards
Ashish

York