[U-Boot] [PATCH] configs: vf610: increase maximum size and enforce correct limit

[Stefano Babic]

Hi Tom, Stefan,

On 31/10/2017 03:47, Tom Rini wrote:
> On Mon, Oct 30, 2017 at 09:59:04AM +0100, Stefan Agner wrote:
>> Hi Tom, Stefano,
>>
>> Any chance to get this still into 2017.11? It allows to use 2017.11 on
>> my board...
> 
> Stefano, this is your call, thanks!

I looking into the list to pick up all remaining patches - this go in !

Regards,
Stefano

> 
>>
>> --
>> Stefan
>>
>> On 2017-10-17 13:59, Stefan Agner wrote:
>>> From: Stefan Agner <stefan.agner at toradex.com>
>>>
>>> On Vybrid SoCs U-Boot gets loaded into GFX SRAM which is 512KiB.
>>> Currently 32KiB is reserved for the IMX header. However, this is
>>> not reflected in the size limit. In v2017.11-rc2 the actual size
>>> limit (512KiB-32KiB) has been reached for Colibri VF61, which
>>> lead to a successful build of U-Boot but not a working binary.
>>>
>>> The IMX header is much smaller than 32KiB, typically around 1KiB.
>>> Decrease the reserved size to 4KiB and specify the correct U-Boot
>>> size limit. Apply this new base address and limit for all Vybrid
>>> based boards.
>>>
>>> Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
>>> ---
>>>
>>>  include/configs/colibri_vf.h | 4 ++--
>>>  include/configs/pcm052.h     | 4 ++--
>>>  include/configs/vf610twr.h   | 4 ++--
>>>  3 files changed, 6 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
>>> index 8166aa4afb..bf3bbffe24 100644
>>> --- a/include/configs/colibri_vf.h
>>> +++ b/include/configs/colibri_vf.h
>>> @@ -75,8 +75,8 @@
>>>  #define CONFIG_FDTADDR			0x84000000
>>>  
>>>  /* We boot from the gfxRAM area of the OCRAM. */
>>> -#define CONFIG_SYS_TEXT_BASE		0x3f408000
>>> -#define CONFIG_BOARD_SIZE_LIMIT		524288
>>> +#define CONFIG_SYS_TEXT_BASE		0x3f401000
>>> +#define CONFIG_BOARD_SIZE_LIMIT		520192
>>>  
>>>  #define SD_BOOTCMD \
>>>  	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
>>> diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h
>>> index 8144a83db2..060928bd30 100644
>>> --- a/include/configs/pcm052.h
>>> +++ b/include/configs/pcm052.h
>>> @@ -89,8 +89,8 @@
>>>  #define CONFIG_LOADADDR			0x82000000
>>>  
>>>  /* We boot from the gfxRAM area of the OCRAM. */
>>> -#define CONFIG_SYS_TEXT_BASE		0x3f408000
>>> -#define CONFIG_BOARD_SIZE_LIMIT		524288
>>> +#define CONFIG_SYS_TEXT_BASE		0x3f401000
>>> +#define CONFIG_BOARD_SIZE_LIMIT		520192
>>>  
>>>  /* if no target-specific extra environment settings were defined by the
>>>     target, define an empty one */
>>> diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
>>> index 3430f27c40..ddfcd6f618 100644
>>> --- a/include/configs/vf610twr.h
>>> +++ b/include/configs/vf610twr.h
>>> @@ -79,8 +79,8 @@
>>>  #define CONFIG_SYS_LOAD_ADDR		0x82000000
>>>  
>>>  /* We boot from the gfxRAM area of the OCRAM. */
>>> -#define CONFIG_SYS_TEXT_BASE		0x3f408000
>>> -#define CONFIG_BOARD_SIZE_LIMIT		524288
>>> +#define CONFIG_SYS_TEXT_BASE		0x3f401000
>>> +#define CONFIG_BOARD_SIZE_LIMIT		520192
>>>  
>>>  /*
>>>   * We do have 128MB of memory on the Vybrid Tower board. Leave the last
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> https://lists.denx.de/listinfo/u-boot
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================