[U-Boot] [PATCH v2 1/2] rtc: pl031: convert the driver to driver model

AKASHI Takahiro takahiro.akashi at linaro.org
Wed Jul 4 07:36:27 UTC 2018


Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
---
 drivers/rtc/Kconfig                  |   6 ++
 drivers/rtc/pl031.c                  | 109 +++++++++++++++++----------
 include/dm/platform_data/rtc_pl031.h |  12 +++
 3 files changed, 87 insertions(+), 40 deletions(-)
 create mode 100644 include/dm/platform_data/rtc_pl031.h

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index a3f8c8aecc..96c4cce410 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -55,6 +55,12 @@ config RTC_MV
 	  Enable Marvell RTC driver. This driver supports the rtc that is present
 	  on some Marvell SoCs.
 
+config RTC_PL031
+	bool "Enable ARM PL031 driver"
+	depends on DM_RTC
+	help
+	  Enable ARM PL031 driver.
+
 config RTC_S35392A
 	bool "Enable S35392A driver"
 	select BITREVERSE
diff --git a/drivers/rtc/pl031.c b/drivers/rtc/pl031.c
index 8955805e3b..eecade8374 100644
--- a/drivers/rtc/pl031.c
+++ b/drivers/rtc/pl031.c
@@ -8,14 +8,10 @@
 
 #include <common.h>
 #include <command.h>
+#include <dm.h>
+#include <dm/platform_data/rtc_pl031.h>
 #include <rtc.h>
 
-#if defined(CONFIG_CMD_DATE)
-
-#ifndef CONFIG_SYS_RTC_PL031_BASE
-#error CONFIG_SYS_RTC_PL031_BASE is not defined!
-#endif
-
 /*
  * Register definitions
  */
@@ -30,78 +26,111 @@
 
 #define RTC_CR_START	(1 << 0)
 
-#define	RTC_WRITE_REG(addr, val) \
-			(*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)) = (val))
-#define	RTC_READ_REG(addr)	\
-			(*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)))
+#define	RTC_WRITE_REG(base, addr, val) \
+			(*(volatile unsigned int *)((base) + (addr)) = (val))
+#define	RTC_READ_REG(base, addr)	\
+			(*(volatile unsigned int *)((base) + (addr)))
 
 static int pl031_initted = 0;
 
 /* Enable RTC Start in Control register*/
-void rtc_init(void)
+void pl031_rtc_init(struct pl031_rtc_platdata *pdata)
 {
-	RTC_WRITE_REG(RTC_CR, RTC_CR_START);
+	RTC_WRITE_REG(pdata->base, RTC_CR, RTC_CR_START);
 
 	pl031_initted = 1;
 }
 
 /*
- * Reset the RTC. We set the date back to 1970-01-01.
+ * Get the current time from the RTC
  */
-void rtc_reset(void)
+static int pl031_rtc_get(struct udevice *dev, struct rtc_time *tm)
 {
-	RTC_WRITE_REG(RTC_LR, 0x00);
-	if(!pl031_initted)
-		rtc_init();
+	struct pl031_rtc_platdata *pdata = dev_get_platdata(dev);
+	ulong tim;
+
+	if (!tm) {
+		puts("Error getting the date/time\n");
+		return -1;
+	}
+
+	if (!pl031_initted)
+		pl031_rtc_init(pdata);
+
+	tim = RTC_READ_REG(pdata->base, RTC_DR);
+
+	rtc_to_tm(tim, tm);
+
+	debug("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
+		tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	return 0;
 }
 
 /*
  * Set the RTC
-*/
-int rtc_set(struct rtc_time *tmp)
+ */
+static int pl031_rtc_set(struct udevice *dev, const struct rtc_time *tm)
 {
+	struct pl031_rtc_platdata *pdata = dev_get_platdata(dev);
 	unsigned long tim;
 
-	if(!pl031_initted)
-		rtc_init();
-
-	if (tmp == NULL) {
+	if (!tm) {
 		puts("Error setting the date/time\n");
 		return -1;
 	}
 
+	if (!pl031_initted)
+		pl031_rtc_init(pdata);
+
 	/* Calculate number of seconds this incoming time represents */
-	tim = rtc_mktime(tmp);
+	tim = rtc_mktime(tm);
 
-	RTC_WRITE_REG(RTC_LR, tim);
+	RTC_WRITE_REG(pdata->base, RTC_LR, tim);
 
 	return -1;
 }
 
 /*
- * Get the current time from the RTC
+ * Reset the RTC. We set the date back to 1970-01-01.
  */
-int rtc_get(struct rtc_time *tmp)
+static int pl031_rtc_reset(struct udevice *dev)
 {
-	ulong tim;
+	struct pl031_rtc_platdata *pdata = dev_get_platdata(dev);
 
-	if(!pl031_initted)
-		rtc_init();
+	RTC_WRITE_REG(pdata->base, RTC_LR, 0x00);
 
-	if (tmp == NULL) {
-		puts("Error getting the date/time\n");
-		return -1;
-	}
+	if (!pl031_initted)
+		pl031_rtc_init(pdata);
 
-	tim = RTC_READ_REG(RTC_DR);
+	return 0;
+}
+
+static const struct rtc_ops pl031_rtc_ops = {
+	.get = pl031_rtc_get,
+	.set = pl031_rtc_set,
+	.reset = pl031_rtc_reset,
+};
 
-	rtc_to_tm(tim, tmp);
+static const struct udevice_id pl031_rtc_ids[] = {
+	{ .compatible = "arm,pl031" },
+	{ }
+};
 
-	debug ( "Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+static int pl031_rtc_ofdata_to_platdata(struct udevice *dev)
+{
+	struct pl031_rtc_platdata *pdata = dev_get_platdata(dev);
 
+	pdata->base = devfdt_get_addr(dev);
 	return 0;
 }
 
-#endif
+U_BOOT_DRIVER(rtc_pl031) = {
+	.name	= "rtc-pl031",
+	.id	= UCLASS_RTC,
+	.of_match = pl031_rtc_ids,
+	.ofdata_to_platdata = pl031_rtc_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct pl031_rtc_platdata),
+	.ops	= &pl031_rtc_ops,
+};
diff --git a/include/dm/platform_data/rtc_pl031.h b/include/dm/platform_data/rtc_pl031.h
new file mode 100644
index 0000000000..8e4ba1ce69
--- /dev/null
+++ b/include/dm/platform_data/rtc_pl031.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __rtc_pl031_h
+#define __rtc_pl031_h
+
+#include <asm/types.h>
+
+struct pl031_rtc_platdata {
+	phys_addr_t base;
+};
+
+#endif
-- 
2.17.0



More information about the U-Boot mailing list