[U-Boot] [PATCH 1/2 v2] board: freescale: ls1012afrx:Common files to support

[Pramod Kumar]

>-----Original Message-----
>From: York Sun
>Sent: Tuesday, July 3, 2018 8:53 PM
>To: Pramod Kumar <pramod.kumar_1 at nxp.com>; u-boot at lists.denx.de
>Subject: Re: [PATCH 1/2 v2] board: freescale: ls1012afrx:Common files to
>support
>
>On 06/06/2018 04:16 AM, Pramod Kumar wrote:
>> LS1012A-FRDM and LS1012A-FRWY board.
>>
>> 1-Move all common files applicable for both boards LS1012A-FRDM
>>   and LS1012A-FRWY into board directory ls1012afrx.
>> 2-Restructure LS1012A-FRDM code. Only board specific files are
>>   in LS1012A-FRDM board directory.
>>
>> Signed-off-by: Pramod Kumar <pramod.kumar_1 at nxp.com>
>> ---
>> Depends on:
>> http://patchwork.ozlabs.org/patch/918935/
>> http://patchwork.ozlabs.org/patch/918933/
>> http://patchwork.ozlabs.org/patch/918932/
>>
>> Changes for v2:
>>  - Rebased patch to above dependency patches
>>
>
>Previous patch 918933 added FRWY board into FRDM Kconfig. If you want to
>separate them, send a patch to do that. Don't mix with adding a new board.
>
For patch http://patchwork.ozlabs.org/patch/926134/
[U-Boot,1/2,v2] board: freescale: ls1012afrx:Common files to support
In this patch, i have removed FRWY kconfig support. 
I have created a new directory "board/freescale/ls1012afrx/" and added common files 
which are applicable for both FRDM and FRWY.
This patch would enable only FRDM board.

For patch http://patchwork.ozlabs.org/patch/926132/
[U-Boot,2/2,v2] board: freescale: ls1012afrwy: Add LS1012A-FRWY board support.
This patch create support for FRWY board by creating new directory "/board/freescale/ls1012afrwy".
FRWY board would use the common files located in "board/freescale/ls1012afrx/".
This patch would enable the FRWY board.
>York