[U-Boot] [PATCH v3 5/7] armv8: ls1046a: initial icid setup support
Bharat Bhushan
bharat.bhushan at nxp.com
Mon Jul 9 12:13:17 UTC 2018
> -----Original Message-----
> From: Laurentiu Tudor [mailto:laurentiu.tudor at nxp.com]
> Sent: Wednesday, July 4, 2018 7:44 PM
> To: York Sun <york.sun at nxp.com>; Prabhakar Kushwaha
> <prabhakar.kushwaha at nxp.com>; u-boot at lists.denx.de
> Cc: Bharat Bhushan <bharat.bhushan at nxp.com>; Laurentiu Tudor
> <laurentiu.tudor at nxp.com>
> Subject: [PATCH v3 5/7] armv8: ls1046a: initial icid setup support
>
> Add infrastructure for ICID setup and device tree fixup on ARM platforms.
> This include basic ICID setup for several devices.
>
> Signed-off-by: Laurentiu Tudor <laurentiu.tudor at nxp.com>
> ---
> arch/arm/cpu/armv8/fsl-layerscape/Makefile | 1 +
> arch/arm/cpu/armv8/fsl-layerscape/icid.c | 111 ++++++++++++++++++
> .../arm/cpu/armv8/fsl-layerscape/ls1046_ids.c | 29 +++++
> arch/arm/cpu/armv8/fsl-layerscape/soc.c | 3 +
> .../asm/arch-fsl-layerscape/fsl_icid.h | 80 +++++++++++++
> board/freescale/ls1046aqds/ls1046aqds.c | 2 +
> board/freescale/ls1046ardb/ls1046ardb.c | 3 +
> 7 files changed, 229 insertions(+)
> create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/icid.c
> create mode 100644 arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c
> create mode 100644 arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
>
> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
> b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
> index 1e9e4680fe..5d6f68aad6 100644
> --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
> +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
> @@ -37,6 +37,7 @@ endif
>
> ifneq ($(CONFIG_ARCH_LS1046A),)
> obj-$(CONFIG_SYS_HAS_SERDES) += ls1046a_serdes.o
> +obj-y += icid.o ls1046_ids.o
> endif
>
> ifneq ($(CONFIG_ARCH_LS1088A),)
> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/icid.c
> b/arch/arm/cpu/armv8/fsl-layerscape/icid.c
> new file mode 100644
> index 0000000000..8694bd6fa1
> --- /dev/null
> +++ b/arch/arm/cpu/armv8/fsl-layerscape/icid.c
> @@ -0,0 +1,111 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2018 NXP
> + */
> +
> +#include <common.h>
> +#include <linux/libfdt.h>
> +#include <fdt_support.h>
> +
> +#include <asm/io.h>
> +#include <asm/processor.h>
> +#include <asm/arch-fsl-layerscape/fsl_icid.h>
> +
> +static void set_icid(struct icid_id_table *tbl, int size) {
> + int i;
> +
> + for (i = 0; i < size; i++)
> + out_be32((u32 *)(tbl[i].reg_addr), tbl[i].reg); }
> +
> +void set_icids(void)
> +{
> + /* setup general icid offsets */
> + set_icid(icid_tbl, icid_tbl_sz);
> +}
> +
> +int fdt_set_iommu_prop(void *blob, int off, int smmu_ph, u32 *ids, int
> +num_ids) {
> + int i, ret;
> + u32 prop[8];
> +
> + for (i = 0; i < num_ids; i++) {
> + prop[i * 2] = cpu_to_fdt32(smmu_ph);
> + prop[i * 2 + 1] = cpu_to_fdt32(ids[i]);
> + }
> + ret = fdt_setprop(blob, off, "iommus",
> + prop, sizeof(u32) * num_ids * 2);
> + if (ret > 0) {
> + printf("WARNING unable to set iommus: %s\n",
> fdt_strerror(off));
> + return off;
> + }
> + ret = fdt_setprop_empty(blob, off, "dma-coherent");
This forces "dma-coherent" for all SOCs, although there is no current known SOCs which does not support non-coherent but maybe safe not to set from common code.
> + if (ret > 0) {
> + printf("WARNING unable to set dma-coherent: %s\n",
> + fdt_strerror(off));
> + return off;
> + }
> +
> + return 0;
> +}
> +
> +int fdt_fixup_icid_tbl(void *blob, int smmu_ph,
> + struct icid_id_table *tbl, int size) {
> + int i, err, off;
> +
> + for (i = 0; i < size; i++) {
> + if (!tbl[i].compat)
> + continue;
> +
> + off = fdt_node_offset_by_compat_reg(blob,
> + tbl[i].compat,
> + tbl[i].compat_addr);
> + if (off > 0) {
> + err = fdt_set_iommu_prop(blob, off, smmu_ph,
> + &tbl[i].id, 1);
> + if (err)
> + return err;
> + } else {
> + printf("WARNING could not find node %s: %s.\n",
> + tbl[i].compat, fdt_strerror(off));
> + }
> + }
> +
> + return 0;
> +}
> +
> +int fdt_get_smmu_phandle(void *blob)
> +{
> + int noff, smmu_ph;
> +
> + noff = fdt_node_offset_by_compatible(blob, -1, "arm,mmu-500");
> + if (noff < 0) {
> + printf("WARNING failed to get smmu node: %s\n",
> + fdt_strerror(noff));
> + return noff;
> + }
> +
> + smmu_ph = fdt_get_phandle(blob, noff);
> + if (!smmu_ph) {
> + smmu_ph = fdt_create_phandle(blob, noff);
> + if (!smmu_ph) {
> + printf("WARNING failed to get smmu phandle\n");
> + return -1;
> + }
> + }
> +
> + return smmu_ph;
> +}
> +
> +void fdt_fixup_icid(void *blob)
> +{
> + int smmu_ph;
> +
> + smmu_ph = fdt_get_smmu_phandle(blob);
> + if (smmu_ph < 0)
> + return;
> +
> + fdt_fixup_icid_tbl(blob, smmu_ph, icid_tbl, icid_tbl_sz); }
> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c
> b/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c
> new file mode 100644
> index 0000000000..1c528ab751
> --- /dev/null
> +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c
> @@ -0,0 +1,29 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2018 NXP
> + */
> +
> +#include <common.h>
> +#include <asm/arch-fsl-layerscape/immap_lsch2.h>
> +#include <asm/arch-fsl-layerscape/fsl_icid.h>
> +
> +struct icid_id_table icid_tbl[] = {
> +#ifdef CONFIG_SYS_DPAA_QBMAN
> + SET_QMAN_ICID(FSL_DPAA1_STREAM_ID_START),
> + SET_BMAN_ICID(FSL_DPAA1_STREAM_ID_START + 1), #endif
> +
> + SET_SDHC_ICID(FSL_SDHC_STREAM_ID),
> +
> + SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
> + SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
> + SET_USB_ICID(3, "snps,dwc3", FSL_USB3_STREAM_ID),
> +
> + SET_SATA_ICID("fsl,ls1046a-ahci", FSL_SATA_STREAM_ID),
> + SET_QDMA_ICID("fsl,ls1046a-qdma", FSL_QDMA_STREAM_ID),
> + SET_EDMA_ICID(FSL_EDMA_STREAM_ID),
> + SET_ETR_ICID(FSL_ETR_STREAM_ID),
> + SET_DEBUG_ICID(FSL_DEBUG_STREAM_ID),
> +};
> +
> +int icid_tbl_sz = ARRAY_SIZE(icid_tbl);
> diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> index bfd663942a..5c5df5b7ef 100644
> --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
> @@ -13,6 +13,7 @@
> #include <asm/io.h>
> #include <asm/global_data.h>
> #include <asm/arch-fsl-layerscape/config.h>
> +#include <asm/arch-fsl-layerscape/fsl_icid.h>
> #ifdef CONFIG_LAYERSCAPE_NS_ACCESS
> #include <fsl_csu.h>
> #endif
> @@ -674,6 +675,8 @@ void fsl_lsch2_early_init_f(void)
> erratum_a009798();
> erratum_a008997();
> erratum_a009007();
> +
> + set_icids();
> }
> #endif
>
> diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
> b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
> new file mode 100644
> index 0000000000..249837c78e
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h
> @@ -0,0 +1,80 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright 2018 NXP
> + */
> +
> +#ifndef _FSL_ICID_H_
> +#define _FSL_ICID_H_
> +
> +#include <asm/types.h>
> +#include <fsl_qbman.h>
> +
> +struct icid_id_table {
> + const char *compat;
> + u32 id;
> + u32 reg;
> + phys_addr_t compat_addr;
> + phys_addr_t reg_addr;
> +};
> +
> +u32 get_ppid_icid(int ppid_tbl_idx, int ppid); int
> +fdt_get_smmu_phandle(void *blob); int fdt_set_iommu_prop(void *blob,
> +int off, int smmu_ph, u32 *ids, int num_ids); void set_icids(void);
> +void fdt_fixup_icid(void *blob);
> +
> +#define SET_ICID_ENTRY(name, idA, regA, addr, compataddr) \
> + { .compat = name, \
> + .id = idA, \
> + .reg = regA, \
> + .compat_addr = compataddr, \
> + .reg_addr = addr, \
> + }
> +
> +#define SET_SCFG_ICID(compat, icid, name, compataddr) \
> + SET_ICID_ENTRY(compat, icid, (((icid) << 24) | (1 << 23)), \
> + offsetof(struct ccsr_scfg, name) +
> CONFIG_SYS_FSL_SCFG_ADDR, \
> + compataddr)
> +
> +#define SET_USB_ICID(usb_num, compat, icid) \
> + SET_SCFG_ICID(compat, icid, usb##usb_num##_icid,\
> + CONFIG_SYS_XHCI_USB##usb_num##_ADDR)
> +
> +#define SET_SATA_ICID(compat, icid) \
> + SET_SCFG_ICID(compat, icid, sata_icid,\
> + AHCI_BASE_ADDR)
> +
> +#define SET_SDHC_ICID(icid) \
> + SET_SCFG_ICID("fsl,esdhc", icid, sdhc_icid,\
> + CONFIG_SYS_FSL_ESDHC_ADDR)
> +
> +#define SET_QDMA_ICID(compat, icid) \
> + SET_SCFG_ICID(compat, icid, dma_icid,\
> + QDMA_BASE_ADDR)
> +
> +#define SET_EDMA_ICID(icid) \
> + SET_SCFG_ICID("fsl,vf610-edma", icid, edma_icid,\
> + EDMA_BASE_ADDR)
Is same "edma" version used in all SOCs? Can I call this for any other platform ?
> +
> +#define SET_ETR_ICID(icid) \
> + SET_SCFG_ICID(NULL, icid, etr_icid, 0)
> +
> +#define SET_DEBUG_ICID(icid) \
> + SET_SCFG_ICID(NULL, icid, debug_icid, 0)
> +
> +#define SET_QMAN_ICID(icid) \
> + SET_ICID_ENTRY("fsl,qman", icid, icid, \
> + offsetof(struct ccsr_qman, liodnr) + \
> + CONFIG_SYS_FSL_QMAN_ADDR, \
> + CONFIG_SYS_FSL_QMAN_ADDR)
> +
> +#define SET_BMAN_ICID(icid) \
> + SET_ICID_ENTRY("fsl,bman", icid, icid, \
> + offsetof(struct ccsr_bman, liodnr) + \
> + CONFIG_SYS_FSL_BMAN_ADDR, \
> + CONFIG_SYS_FSL_BMAN_ADDR)
> +
> +extern struct icid_id_table icid_tbl[]; extern int icid_tbl_sz;
> +
> +#endif
> diff --git a/board/freescale/ls1046aqds/ls1046aqds.c
> b/board/freescale/ls1046aqds/ls1046aqds.c
> index b765f07f85..072f8c37a5 100644
> --- a/board/freescale/ls1046aqds/ls1046aqds.c
> +++ b/board/freescale/ls1046aqds/ls1046aqds.c
> @@ -309,6 +309,8 @@ int ft_board_setup(void *blob, bd_t *bd)
> fdt_fixup_board_enet(blob);
> #endif
>
> + fdt_fixup_icid(blob);
> +
> reg = QIXIS_READ(brdcfg[0]);
> reg = (reg & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
>
> diff --git a/board/freescale/ls1046ardb/ls1046ardb.c
> b/board/freescale/ls1046ardb/ls1046ardb.c
> index feb5c2448a..0a73fe859d 100644
> --- a/board/freescale/ls1046ardb/ls1046ardb.c
> +++ b/board/freescale/ls1046ardb/ls1046ardb.c
> @@ -11,6 +11,7 @@
> #include <asm/arch/fsl_serdes.h>
> #include <asm/arch/ppa.h>
> #include <asm/arch/soc.h>
> +#include <asm/arch-fsl-layerscape/fsl_icid.h>
> #include <hwconfig.h>
> #include <ahci.h>
> #include <mmc.h>
> @@ -174,6 +175,8 @@ int ft_board_setup(void *blob, bd_t *bd)
> fdt_fixup_fman_ethernet(blob);
> #endif
>
> + fdt_fixup_icid(blob);
> +
> return 0;
> }
> #endif
> --
> 2.17.1
More information about the U-Boot
mailing list