[U-Boot] [PATCH 1/2] ARM: DTS: Resync LogicPD-Torpedo-37xx-devkit with Linux 4.18-RC4
Adam Ford
aford173 at gmail.com
Tue Jul 10 01:18:14 UTC 2018
There have been some refactoring of the DTS files for the Logic PD
DM37 Torpedo. This patch re-sync's the DTS files with Linux
Signed-off-by: Adam Ford <aford173 at gmail.com>
diff --git a/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts
index 43e9364083..234afd6d60 100644
--- a/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts
@@ -9,396 +9,69 @@
#include "omap36xx.dtsi"
#include "logicpd-torpedo-som.dtsi"
#include "omap-gpmc-smsc9221.dtsi"
+#include "logicpd-torpedo-baseboard.dtsi"
/ {
model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit";
compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
- gpio_keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
-
- sysboot2 {
- label = "sysboot2";
- gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */
- linux,code = <BTN_0>;
- wakeup-source;
- };
-
- sysboot5 {
- label = "sysboot5";
- gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */
- linux,code = <BTN_1>;
- wakeup-source;
- };
-
- gpio1 {
- label = "gpio1";
- gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */
- linux,code = <BTN_2>;
- wakeup-source;
- };
-
- gpio2 {
- label = "gpio2";
- gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */
- linux,code = <BTN_3>;
- wakeup-source;
- };
- };
-
- sound {
- compatible = "ti,omap-twl4030";
- ti,model = "omap3logic";
- ti,mcbsp = <&mcbsp2>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins>;
-
- led1 {
- label = "led1";
- gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */
- linux,default-trigger = "cpu0";
- };
-
- led2 {
- label = "led2";
- gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */
- linux,default-trigger = "none";
- };
- };
-
- pwm10: dmtimer-pwm {
- compatible = "ti,omap-dmtimer-pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pwm_pins>;
- ti,timers = <&timer10>;
- #pwm-cells = <3>;
- };
-
-};
-
-&vaux1 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
-};
-
-&vaux4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-};
-
-&mcbsp2 {
- status = "okay";
-};
-
-&charger {
- ti,bb-uvolt = <3200000>;
- ti,bb-uamp = <150>;
-};
-
-&gpmc {
- ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
- 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */
-
- ethernet at gpmc {
- pinctrl-names = "default";
- pinctrl-0 = <&lan9221_pins>;
- interrupt-parent = <&gpio5>;
- interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */
- reg = <1 0 0xff>;
- };
-};
-
-&vpll2 {
- regulator-always-on;
-};
-
-&dss {
- status = "ok";
- vdds_dsi-supply = <&vpll2>;
- vdda_video-supply = <&video_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&dss_dpi_pins1>;
- port {
- dpi_out: endpoint {
- remote-endpoint = <&lcd_in>;
- data-lines = <16>;
- };
- };
-};
-
-/ {
- aliases {
- display0 = &lcd0;
- };
-
- video_reg: video_reg {
- pinctrl-names = "default";
- pinctrl-0 = <&panel_pwr_pins>;
+ wl12xx_vmmc: wl12xx_vmmc {
compatible = "regulator-fixed";
- regulator-name = "fixed-supply";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
- };
-
- lcd0: display {
- compatible = "panel-dpi";
- label = "15";
- status = "okay";
- /* default-on; */
- pinctrl-names = "default";
-
- port {
- lcd_in: endpoint {
- remote-endpoint = <&dpi_out>;
- };
- };
-
- panel-timing {
- clock-frequency = <9000000>;
- hactive = <480>;
- vactive = <272>;
- hfront-porch = <3>;
- hback-porch = <2>;
- hsync-len = <42>;
- vback-porch = <3>;
- vfront-porch = <4>;
- vsync-len = <11>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <1>;
- };
- };
-
- bl: backlight {
- compatible = "pwm-backlight";
- pinctrl-names = "default";
- pinctrl-0 = <&backlight_pins>;
- pwms = <&pwm10 0 5000000 0>;
- brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
- default-brightness-level = <7>;
- enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
+ regulator-name = "vwl1271";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio5 29 0>; /* gpio157 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ vin-supply = <&vmmc2>;
};
};
-&mmc1 {
- interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+/*
+ * Only found on the wireless SOM. For the SOM without wireless, the pins for
+ * MMC3 can be routed with jumpers to the second MMC slot on the devkit and
+ * gpio157 is not connected. So this should be OK to keep common for now,
+ * probably device tree overlays is the way to go with the various SOM and
+ * jumpering combinations for the long run.
+ */
+&mmc3 {
+ interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+ pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins &mmc1_cd>;
- cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>; /* gpio127 */
- vmmc-supply = <&vmmc1>;
+ vmmc-supply = <&wl12xx_vmmc>;
+ non-removable;
bus-width = <4>;
cap-power-off-card;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore at 2 {
+ compatible = "ti,wl1283";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
+ ref-clock-frequency = <26000000>;
+ tcxo-clock-frequency = <26000000>;
+ };
};
&omap3_pmx_core {
- gpio_key_pins: pinmux_gpio_key_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */
- OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */
- >;
- };
-
- pwm_pins: pinmux_pwm_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */
- >;
- };
-
- led_pins: pinmux_led_pins {
+ mmc3_pins: pinmux_mm3_pins {
pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */
- OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */
- >;
- };
-
- mmc1_pins: pinmux_mmc1_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
- OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
- OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
- OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
- OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
- OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
- >;
- };
-
- tsc2004_pins: pinmux_tsc2004_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */
- >;
- };
-
- backlight_pins: pinmux_backlight_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */
- >;
- };
-
- isp_pins: pinmux_isp_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */
- OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */
- OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */
- OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */
-
- OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */
- OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */
- OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */
- OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */
- OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */
- OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */
- OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */
- OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */
- >;
- };
-
- panel_pwr_pins: pinmux_panel_pwr_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */
- >;
- };
-
- dss_dpi_pins1: pinmux_dss_dpi_pins1 {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */
- OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */
- OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */
- OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */
-
- OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */
- OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */
- OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */
- OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */
- OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */
- OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */
- OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */
- OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */
- OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */
- OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */
- OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */
- OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */
-
- OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */
- OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */
- OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */
- OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */
- OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */
- OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */
+ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */
>;
};
};
-&omap3_pmx_wkup {
- gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
- pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */
- OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */
- >;
- };
-
- lan9221_pins: pinmux_lan9221_pins {
- pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
- >;
- };
-
- mmc1_cd: pinmux_mmc1_cd {
+&omap3_pmx_core2 {
+ mmc3_core2_pins: pinmux_mmc3_core2_pins {
pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
+ OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
>;
};
};
-
-&i2c2 {
- mt9p031 at 48 {
- compatible = "aptina,mt9p031";
- reg = <0x48>;
- clocks = <&isp 0>;
- vaa-supply = <&vaux4>;
- vdd-supply = <&vaux4>;
- vdd_io-supply = <&vaux4>;
- port {
- mt9p031_out: endpoint {
- input-clock-frequency = <24000000>;
- pixel-clock-frequency = <72000000>;
- remote-endpoint = <&ccdc_ep>;
- };
- };
- };
-};
-
-&i2c3 {
- touchscreen: tsc2004 at 48 {
- compatible = "ti,tsc2004";
- reg = <0x48>;
- vio-supply = <&vaux1>;
- pinctrl-names = "default";
- pinctrl-0 = <&tsc2004_pins>;
- interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
-
- touchscreen-fuzz-x = <4>;
- touchscreen-fuzz-y = <7>;
- touchscreen-fuzz-pressure = <2>;
- touchscreen-size-x = <4096>;
- touchscreen-size-y = <4096>;
- touchscreen-max-pressure = <2048>;
-
- ti,x-plate-ohms = <280>;
- ti,esd-recovery-timeout-ms = <8000>;
- };
-};
-
-&mcspi1 {
- at25 at 0 {
- compatible = "atmel,at25";
- reg = <0>;
- spi-max-frequency = <5000000>;
- spi-cpha;
- spi-cpol;
-
- pagesize = <64>;
- size = <32768>;
- address-width = <16>;
- };
-};
-
-&isp {
- pinctrl-names = "default";
- pinctrl-0 = <&isp_pins>;
- ports {
- port at 0 {
- reg = <0>;
- ccdc_ep: endpoint {
- remote-endpoint = <&mt9p031_out>;
- bus-width = <8>;
- hsync-active = <1>;
- vsync-active = <1>;
- pclk-sample = <0>;
- };
- };
- };
-};
-
-&uart1 {
- interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
-};
-
-/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
-&usb_otg_hs {
- pinctrl-names = "default";
- pinctrl-0 = <&hsusb_otg_pins>;
- interface-type = <0>;
- usb-phy = <&usb2_phy>;
- phys = <&usb2_phy>;
- phy-names = "usb2-phy";
- mode = <3>;
- power = <50>;
-};
diff --git a/arch/arm/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/dts/logicpd-torpedo-baseboard.dtsi
new file mode 100644
index 0000000000..86c5644f55
--- /dev/null
+++ b/arch/arm/dts/logicpd-torpedo-baseboard.dtsi
@@ -0,0 +1,395 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
+
+ sysboot2 {
+ label = "sysboot2";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */
+ linux,code = <BTN_0>;
+ wakeup-source;
+ };
+
+ sysboot5 {
+ label = "sysboot5";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */
+ linux,code = <BTN_1>;
+ wakeup-source;
+ };
+
+ gpio1 {
+ label = "gpio1";
+ gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */
+ linux,code = <BTN_2>;
+ wakeup-source;
+ };
+
+ gpio2 {
+ label = "gpio2";
+ gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */
+ linux,code = <BTN_3>;
+ wakeup-source;
+ };
+ };
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "omap3logic";
+ ti,mcbsp = <&mcbsp2>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */
+ linux,default-trigger = "cpu0";
+ };
+
+ led2 {
+ label = "led2";
+ gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */
+ linux,default-trigger = "none";
+ };
+ };
+
+ pwm10: dmtimer-pwm {
+ compatible = "ti,omap-dmtimer-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_pins>;
+ ti,timers = <&timer10>;
+ #pwm-cells = <3>;
+ };
+
+};
+
+&vaux1 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+};
+
+&vaux4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
+&mcbsp2 {
+ status = "okay";
+};
+
+&charger {
+ ti,bb-uvolt = <3200000>;
+ ti,bb-uamp = <150>;
+};
+
+&gpmc {
+ ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
+ 1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */
+
+ ethernet at gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lan9221_pins>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */
+ reg = <1 0 0xff>;
+ };
+};
+
+&vpll2 {
+ regulator-always-on;
+};
+
+&dss {
+ status = "ok";
+ vdds_dsi-supply = <&vpll2>;
+ vdda_video-supply = <&video_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_dpi_pins1>;
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&lcd_in>;
+ data-lines = <16>;
+ };
+ };
+};
+
+/ {
+ aliases {
+ display0 = &lcd0;
+ };
+
+ video_reg: video_reg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_pwr_pins>;
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-supply";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
+ };
+
+ lcd0: display {
+ compatible = "panel-dpi";
+ label = "15";
+ status = "okay";
+ /* default-on; */
+ pinctrl-names = "default";
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <3>;
+ hback-porch = <2>;
+ hsync-len = <42>;
+ vback-porch = <3>;
+ vfront-porch = <4>;
+ vsync-len = <11>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+
+ bl: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+ pwms = <&pwm10 0 5000000 0>;
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <7>;
+ enable-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; /* gpio_154 */
+ };
+};
+
+&mmc1 {
+ interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+ cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio127 */
+ vmmc-supply = <&vmmc1>;
+ bus-width = <4>;
+ cap-power-off-card;
+};
+
+&omap3_pmx_core {
+ gpio_key_pins: pinmux_gpio_key_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */
+ OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */
+ >;
+ };
+
+ pwm_pins: pinmux_pwm_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20B8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* gpmc_ncs5.gpt_10_pwm_evt */
+ >;
+ };
+
+ led_pins: pinmux_led_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */
+ OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+
+ tsc2004_pins: pinmux_tsc2004_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */
+ >;
+ };
+
+ backlight_pins: pinmux_backlight_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_dx.gpio_154 */
+ >;
+ };
+
+ isp_pins: pinmux_isp_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE0) /* cam_hs.cam_hs */
+ OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT | MUX_MODE0) /* cam_vs.cam_vs */
+ OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */
+ OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */
+
+ OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */
+ OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */
+ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */
+ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE0) /* cam_d6.cam_d6 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE0) /* cam_d7.cam_d7 */
+ >;
+ };
+
+ panel_pwr_pins: pinmux_panel_pwr_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4) /* mcbsp4_fs.gpio_155 */
+ >;
+ };
+
+ dss_dpi_pins1: pinmux_dss_dpi_pins1 {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_acbias.dss_acbias */
+
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE0) /* dss_data17.dss_data17 */
+
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data18.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data19.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data20.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data21.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data22.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT_PULLDOWN | PIN_OFF_OUTPUT_LOW | MUX_MODE3) /* dss_data23.dss_data5 */
+ >;
+ };
+};
+
+&omap3_pmx_wkup {
+ gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */
+ >;
+ };
+
+ lan9221_pins: pinmux_lan9221_pins {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */
+ >;
+ };
+
+ mmc1_cd: pinmux_mmc1_cd {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */
+ >;
+ };
+};
+
+&i2c2 {
+ mt9p031 at 48 {
+ compatible = "aptina,mt9p031";
+ reg = <0x48>;
+ clocks = <&isp 0>;
+ vaa-supply = <&vaux4>;
+ vdd-supply = <&vaux4>;
+ vdd_io-supply = <&vaux4>;
+ port {
+ mt9p031_out: endpoint {
+ input-clock-frequency = <24000000>;
+ pixel-clock-frequency = <72000000>;
+ remote-endpoint = <&ccdc_ep>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ touchscreen: tsc2004 at 48 {
+ compatible = "ti,tsc2004";
+ reg = <0x48>;
+ vio-supply = <&vaux1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tsc2004_pins>;
+ interrupts-extended = <&gpio5 25 IRQ_TYPE_EDGE_RISING>; /* gpio 153 */
+
+ touchscreen-fuzz-x = <4>;
+ touchscreen-fuzz-y = <7>;
+ touchscreen-fuzz-pressure = <2>;
+ touchscreen-size-x = <4096>;
+ touchscreen-size-y = <4096>;
+ touchscreen-max-pressure = <2048>;
+
+ ti,x-plate-ohms = <280>;
+ ti,esd-recovery-timeout-ms = <8000>;
+ };
+};
+
+&mcspi1 {
+ at25 at 0 {
+ compatible = "atmel,at25";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ spi-cpha;
+ spi-cpol;
+
+ pagesize = <64>;
+ size = <32768>;
+ address-width = <16>;
+ };
+};
+
+&isp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&isp_pins>;
+ ports {
+ port at 0 {
+ reg = <0>;
+ ccdc_ep: endpoint {
+ remote-endpoint = <&mt9p031_out>;
+ bus-width = <8>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ pclk-sample = <0>;
+ };
+ };
+ };
+};
+
+&uart1 {
+ interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
+&usb_otg_hs {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb_otg_pins>;
+ interface-type = <0>;
+ usb-phy = <&usb2_phy>;
+ phys = <&usb2_phy>;
+ phy-names = "usb2-phy";
+ mode = <3>;
+ power = <50>;
+};
diff --git a/arch/arm/dts/logicpd-torpedo-som.dtsi b/arch/arm/dts/logicpd-torpedo-som.dtsi
index 23c9228d6a..7d2302e870 100644
--- a/arch/arm/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/dts/logicpd-torpedo-som.dtsi
@@ -7,6 +7,10 @@
#include <dt-bindings/input/input.h>
/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
cpus {
cpu at 0 {
cpu0-supply = <&vcc>;
@@ -27,15 +31,11 @@
};
};
- wl12xx_vmmc: wl12xx_vmmc {
- compatible = "regulator-fixed";
- regulator-name = "vwl1271";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&gpio5 29 0>; /* gpio157 */
- startup-delay-us = <70000>;
- enable-active-high;
- vin-supply = <&vmmc2>;
+ /* fixed 26MHz oscillator */
+ hfclk_26m: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
};
};
@@ -73,12 +73,17 @@
};
&i2c1 {
- clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <2600000>;
twl: twl at 48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
+ clocks = <&hfclk_26m>;
+ clock-names = "fck";
+
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
@@ -88,56 +93,23 @@
};
&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
};
&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
at24 at 50 {
- compatible = "at24,24c02";
+ compatible = "atmel,24c64";
readonly;
reg = <0x50>;
};
};
-/*
- * Only found on the wireless SOM. For the SOM without wireless, the pins for
- * MMC3 can be routed with jumpers to the second MMC slot on the devkit and
- * gpio157 is not connected. So this should be OK to keep common for now,
- * probably device tree overlays is the way to go with the various SOM and
- * jumpering combinations for the long run.
- */
-&mmc3 {
- interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
- pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
- pinctrl-names = "default";
- vmmc-supply = <&wl12xx_vmmc>;
- non-removable;
- bus-width = <4>;
- cap-power-off-card;
- #address-cells = <1>;
- #size-cells = <0>;
- wlcore: wlcore at 2 {
- compatible = "ti,wl1283";
- reg = <2>;
- interrupt-parent = <&gpio5>;
- interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
- ref-clock-frequency = <26000000>;
- tcxo-clock-frequency = <26000000>;
- };
-};
-
&omap3_pmx_core {
- mmc3_pins: pinmux_mm3_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */
- OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */
- OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */
- OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */
- OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */
- OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */
- >;
- };
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */
@@ -180,6 +152,24 @@
OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
>;
};
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
};
&uart2 {
@@ -193,15 +183,6 @@
pinctrl-0 = <&mcspi1_pins>;
};
-&omap3_pmx_core2 {
- mmc3_core2_pins: pinmux_mmc3_core2_pins {
- pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
- OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */
- >;
- };
-};
-
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
--
2.17.1
More information about the U-Boot
mailing list