[U-Boot] U-Boot 2018.07 Still Broken for Allwinner H3 SoCs

[Jagan Teki]

On Wed, Jul 11, 2018 at 12:28 PM, Chen-Yu Tsai <wens at csie.org> wrote:
> On Wed, Jul 11, 2018 at 11:53 AM, Chen-Yu Tsai <wens at csie.org> wrote:
>> On Tue, Jul 10, 2018 at 2:13 PM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
>>> On Tue, Jul 10, 2018 at 8:34 AM, Chen-Yu Tsai <wens at csie.org> wrote:
>>>> This is on a Libre Computer ALL-H3-CC H3 variant. Still running a
>>>> bisect, but v2018.07-rc1 is a working version. From the EHCI error
>>>> messages, I'm thinking it might be related to the USB changes lately.
>>>> Not sure if any other SoCs (ex. A64) are broken or not at the moment.
>>>
>>> I'm able to boot with BPI-M2+, where I changed the configurations
>>> based on Libre Computer board.
>>> - remove/disable ehci0, ohci0
>>> - enable ehci1, 2, 3 and ohci1, 2, 3
>>> - remove/disable usb_otg node
>>> - disable MUSB_GADGET
>>
>> On BPI-M2+, with Sinovoip_BPI_M2_Plus_defconfig,
>> cross-compiled using gcc version 7.3.0 (Debian 7.3.0-20)
>
> OK. I dropped back to GCC 6.4.1 from Linaro's 2017.11 release.
> It now works. Will try Linaro's other toolchains later.

OK, I used Linaro GCC 6.3-2017.02