[U-Boot] [PATCH v1 4/6] microblaze: Delete Xilinx watchdog related macros

[Michal Simek]

please put here proper description.

patch itself is fine.

M


On 29.6.2018 23:51, Shreenidhi Shedi wrote:
> Signed-off-by: Shreenidhi Shedi <yesshedi at gmail.com>
> ---
> 
> Changes in v1: None
> 
>  board/xilinx/microblaze-generic/xparameters.h |  4 ----
>  include/configs/microblaze-generic.h          | 10 ----------
>  2 files changed, 14 deletions(-)
> 
> diff --git a/board/xilinx/microblaze-generic/xparameters.h b/board/xilinx/microblaze-generic/xparameters.h
> index 501a23454d..ce1ec4c17a 100644
> --- a/board/xilinx/microblaze-generic/xparameters.h
> +++ b/board/xilinx/microblaze-generic/xparameters.h
> @@ -21,7 +21,3 @@
>  /* Flash Memory is FLASH_2Mx32 */
>  #define XILINX_FLASH_START	0x2C000000
>  #define XILINX_FLASH_SIZE	0x00800000
> -
> -/* Watchdog IP is wxi_timebase_wdt_0 */
> -#define XILINX_WATCHDOG_BASEADDR	0x50000000
> -#define XILINX_WATCHDOG_IRQ		1
> diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
> index 7f16700d4f..6a049cf2af 100644
> --- a/include/configs/microblaze-generic.h
> +++ b/include/configs/microblaze-generic.h
> @@ -43,16 +43,6 @@
>  # define CONFIG_SYS_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
>  #endif
>  
> -/* watchdog */
> -#if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ)
> -# define CONFIG_WATCHDOG_BASEADDR	XILINX_WATCHDOG_BASEADDR
> -# define CONFIG_WATCHDOG_IRQ		XILINX_WATCHDOG_IRQ
> -# ifndef CONFIG_SPL_BUILD
> -#  define CONFIG_HW_WATCHDOG
> -#  define CONFIG_XILINX_TB_WATCHDOG
> -# endif
> -#endif
> -
>  #define CONFIG_SYS_MALLOC_LEN	0xC0000
>  
>  /* Stack location before relocation */
>