[U-Boot] [PATCH 3/3] net: zynq_gem: convert to use livetree
Joe Hershberger
joe.hershberger at ni.com
Wed Jul 11 18:56:29 UTC 2018
Hi Siva,
On Fri, Jul 6, 2018 at 5:10 AM, Siva Durga Prasad Paladugu
<siva.durga.paladugu at xilinx.com> wrote:
> This patch updates the zynq gem driver to support
> livetree.
>
> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>
> Signed-off-by: Vipul Kumar <vipul.kumar at xilinx.com>
> ---
> drivers/net/zynq_gem.c | 29 ++++++++++++++---------------
> 1 file changed, 14 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
> index a817f2e..b9858e4 100644
> --- a/drivers/net/zynq_gem.c
> +++ b/drivers/net/zynq_gem.c
> @@ -178,7 +178,7 @@ struct zynq_gem_priv {
> struct zynq_gem_regs *iobase;
> phy_interface_t interface;
> struct phy_device *phydev;
> - int phy_of_handle;
> + ofnode phy_of_node;
> struct mii_dev *bus;
> struct clk clk;
> u32 max_speed;
> @@ -349,8 +349,7 @@ static int zynq_phy_init(struct udevice *dev)
>
> priv->phydev->advertising = priv->phydev->supported;
>
> - if (priv->phy_of_handle > 0)
> - dev_set_of_offset(priv->phydev->dev, priv->phy_of_handle);
> + priv->phydev->dev->node = priv->phy_of_node;
>
> return phy_config(priv->phydev);
> }
> @@ -693,21 +692,23 @@ static int zynq_gem_ofdata_to_platdata(struct udevice *dev)
> {
> struct eth_pdata *pdata = dev_get_platdata(dev);
> struct zynq_gem_priv *priv = dev_get_priv(dev);
> - int node = dev_of_offset(dev);
> + struct ofnode_phandle_args phandle_args;
> const char *phy_mode;
>
> - pdata->iobase = (phys_addr_t)devfdt_get_addr(dev);
> + pdata->iobase = (phys_addr_t)dev_read_addr(dev);
> priv->iobase = (struct zynq_gem_regs *)pdata->iobase;
> /* Hardcode for now */
> priv->phyaddr = -1;
>
> - priv->phy_of_handle = fdtdec_lookup_phandle(gd->fdt_blob, node,
> - "phy-handle");
> - if (priv->phy_of_handle > 0)
> - priv->phyaddr = fdtdec_get_int(gd->fdt_blob,
> - priv->phy_of_handle, "reg", -1);
> + if (dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
> + &phandle_args)) {
> + debug("phy-handle does not exist %s\n", dev->name);
> + return -ENOENT;
> + }
>
> - phy_mode = fdt_getprop(gd->fdt_blob, node, "phy-mode", NULL);
> + priv->phyaddr = ofnode_read_u32_default(phandle_args.node, "reg", -1);
> + priv->phy_of_node = phandle_args.node;
> + phy_mode = dev_read_prop(dev, "phy-mode", NULL);
I want to make sure we are in sync here. I plan to take Grygorii's series.
Thanks!
> if (phy_mode)
> pdata->phy_interface = phy_get_interface_by_name(phy_mode);
> if (pdata->phy_interface == -1) {
> @@ -716,10 +717,8 @@ static int zynq_gem_ofdata_to_platdata(struct udevice *dev)
> }
> priv->interface = pdata->phy_interface;
>
> - priv->max_speed = fdtdec_get_uint(gd->fdt_blob, priv->phy_of_handle,
> - "max-speed", SPEED_1000);
> - priv->int_pcs = fdtdec_get_bool(gd->fdt_blob, node,
> - "is-internal-pcspma");
> + priv->max_speed = dev_read_u32_default(dev, "max-speed", SPEED_1000);
> + priv->int_pcs = dev_read_bool(dev, "is-internal-pcspma");
>
> printf("ZYNQ GEM: %lx, phyaddr %x, interface %s\n", (ulong)priv->iobase,
> priv->phyaddr, phy_string_for_interface(priv->interface));
> --
> 2.7.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
More information about the U-Boot
mailing list