[U-Boot] [Bug & Question] ubifs does not understand ".." in file path ?

[Masahiro Yamada]

Hi.


I was playing around with the ditro-boot on NAND + UBI.

I was hit by a problem when loading files from ubifs.


My 'extlinux.conf' script looks like this:

---------------------------------
menu title UniPhier Boot Options.

timeout 5

default UniPhier

label UniPhier
      kernel ../Image
      initrd ../rootfs.cpio.gz
      fdtdir ..
----------------------------------


As doc/README.distro says,
'extlinux.conf' is generally located in 'extlinux' subdirectory.

So, the paths to kernel, initrd, fdt usually contain '..'

This totally works fine when loading files
from a FAT-formated MMC device.

'run bootcmd_mmc0' successfully boots Linus
in the disto-boot manner.



However, 'run bootcmd_ubifs0' fails to boot.


=> run bootcmd_ubifs0
ubi0: attaching mtd1
ubi0: scanning is finished
ubi0: attached mtd1 (name "mtd=1", size 1023 MiB)
ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 253952 bytes
ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 4096
ubi0: VID header offset: 4096 (aligned 4096), data offset: 8192
ubi0: good PEBs: 4088, bad PEBs: 4, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence
number: 1407739552
ubi0: available PEBs: 0, total reserved PEBs: 4088, PEBs reserved for
bad PEB handling: 76
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "boot", R/O mode
UBIFS (ubi0:0): LEB size: 253952 bytes (248 KiB), min./max. I/O unit
sizes: 4096 bytes/4096 bytes
UBIFS (ubi0:0): FS size: 1014284288 bytes (967 MiB, 3994 LEBs),
journal size 33521664 bytes (31 MiB, 132 LEBs)
UBIFS (ubi0:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi0:0): media format: w5/r0 (latest is w4/r0), UUID
cc8f68da-030d-408c-a91f-f8cc195a2946, small LPT model
Scanning ubi 0:...
Found /boot/extlinux/extlinux.conf
Retrieving file: /boot/extlinux/extlinux.conf
148 bytes read in 1 ms (144.5 KiB/s)
UniPhier Boot Options.
1:      UniPhier
Enter choice: 1:        UniPhier
Retrieving file: /boot/extlinux/../rootfs.cpio.gz
Skipping UniPhier for failure retrieving initrd
SCRIPT FAILED: continuing...




The boot log says
it succeeded in loading '/boot/extlinux/extlinux.conf'
but failed in loading '/boot/extlinux/../rootfs.cpio.gz'



In my quick experiments,

load '/boot/extlinux/extlinux.conf'            -> SUCCESS
load '/boot/extlinux/../rootfs.cpio.gz'        -> FAILURE
load '/boot/rootfs.cpio.gz'                    -> SUCCESS
load '/boot/extlinux/../Image'                 -> FAILURE
load '/boot/Image'                             -> SUCCESS
load '/boot/extlinux/../uniphier-ld20-ref.dtb' -> FAILURE
load '/boot/uniphier-ld20-ref.dtb'             -> SUCCESS



>From the test results above,
my conclusion is loading a file path that contains '..' is not working.


Not sure where the root cause is.
Anybody who has insight about this?



-- 
Best Regards
Masahiro Yamada