[U-Boot] [ v2 09/10] arm: dts: stm32: add display for STM32F769 disco board

[Yannick Fertré]

Enable the display controller, mipi dsi bridge & panel.
Set panel display timings.

Signed-off-by: Yannick Fertré <yannick.fertre at st.com>
---
 arch/arm/dts/stm32f769-disco.dts | 41 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm/dts/stm32f769-disco.dts b/arch/arm/dts/stm32f769-disco.dts
index 59c9d31..dec04bc 100644
--- a/arch/arm/dts/stm32f769-disco.dts
+++ b/arch/arm/dts/stm32f769-disco.dts
@@ -84,6 +84,18 @@
 		compatible = "st,button1";
 		button-gpio = <&gpioa 0 0>;
 	};
+
+	panel: panel {
+		compatible = "orisetech,otm8009a";
+		reset-gpios = <&gpioj 15 1>;
+		status = "okay";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
 };
 
 &clk_hse {
@@ -264,3 +276,32 @@
 	bus-width = <4>;
 	max-frequency = <25000000>;
 };
+
+&ltdc {
+	status = "okay";
+
+	ports {
+		port at 0 {
+			dp_out: endpoint {
+				remote-endpoint = <&dsi_in>;
+			};
+		};
+	};
+};
+
+&dsi {
+	status = "okay";
+
+	ports {
+		port at 0 {
+			dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+		port at 1 {
+			dsi_in: endpoint {
+				remote-endpoint = <&dp_out>;
+			};
+		};
+	};
+};
-- 
1.9.1