[U-Boot] [PATCH 1/4] stm32mp1: add gpio led support
Patrick Delaunay
patrick.delaunay at st.com
Fri Jul 13 15:21:08 UTC 2018
This patch add the 4 LED available on the ED1 board and activated
gpio led driver.
Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
---
arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 24 ++++++++++++++++++++++++
configs/stm32mp15_basic_defconfig | 2 ++
2 files changed, 26 insertions(+)
diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
index 5b8be93..e10e4b6 100644
--- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
@@ -13,6 +13,30 @@
mmc1 = &sdmmc2;
i2c3 = &i2c4;
};
+
+ led {
+ compatible = "gpio-leds";
+
+ red {
+ label = "stm32mp:red:status";
+ gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ green {
+ label = "stm32mp:green:user";
+ gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ orange {
+ label = "stm32mp:orange:status";
+ gpios = <&gpioh 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ blue {
+ label = "stm32mp:blue:user";
+ gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&uart4_pins_a {
diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index 3a94db5..dc38bcc 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -29,6 +29,8 @@ CONFIG_CMD_EXT4_WRITE=y
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_STM32F7=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
CONFIG_DM_MMC=y
CONFIG_STM32_SDMMC2=y
# CONFIG_SPL_PINCTRL_FULL is not set
--
2.7.4
More information about the U-Boot
mailing list