[U-Boot] [PATCH 0/2] arm: zynq: add support for the zybo z7 board

[Luis Araneda]

This series adds support for the Digilent Zybo Z7 board

The only think, that I tested, and is not working yet, is reading the
MAC address from the OTP region of the SPI flash memory, but I pretend
to work on that

I decided to split this series in two patches because the first contains
the ps7_init_* file generated by Vivado and is ~170 kB. I tried to strip
as much as possible from the file (from ~520 kB), but I wanted to preserve
Vivado's comments to compare its output on future versions
(it might have bugfixes).
If the patch doesn't make it to the mailing list, I hope to find
another solution, or I'll just simply remove additional content
(Vivado's comments)


Luis Araneda (2):
  arm: zynq: add ps7_init file for zybo z7
  arm: zynq: add support for the zybo z7 board

 arch/arm/dts/Makefile                         |    3 +-
 arch/arm/dts/zynq-zybo-z7.dts                 |   91 +
 board/xilinx/zynq/zynq-zybo-z7/ps7_init_gpl.c | 3959 +++++++++++++++++
 configs/zynq_zybo_z7_defconfig                |   68 +
 4 files changed, 4120 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/zynq-zybo-z7.dts
 create mode 100644 board/xilinx/zynq/zynq-zybo-z7/ps7_init_gpl.c
 create mode 100644 configs/zynq_zybo_z7_defconfig

-- 
2.18.0