[U-Boot] [PATCH 2/2] dm: sunxi: Use DM for MMC and SATA on all A10 boards

[Jagan Teki]

On Thu, Jul 12, 2018 at 1:52 PM, Adam Sampson <ats at offog.org> wrote:
> On Thu, Jul 12, 2018 at 12:40:14PM +0530, Jagan Teki wrote:
>> Did you test eMMC in any of A10 look it is not detecting during SD
>> boot and vice-versa happened during eMMC boot. May be it's because of
>> pincrtrl for U-Boot which is not initializing for in DM_MMC.
>
> No, I don't have any boards with eMMC, so I haven't tested eMMC with
> either A10 or A20, I'm afraid.
>
> (I also haven't been able to find an A13 board to test with -- if there
> are any A13 owners reading this, I suspect a similar change would work,
> and it'll need doing before the A13 boards get removed for not having DM
> support...)

Look like there is no eMMC on A10, atleast on existing boards in ML. I
understand the eMMC issues with existing dt driver will send the
patches for the same. sun4i iNet 3F, 3W has missing mmc0 node on DT,
DM_MMC need to have this. anyway I'm sending all in one series.

Applied to u-boot-sunxi/master