[U-Boot] [PATCH 08/25] ARM: dts: sun7i: Add mmc0 node for Primo73 tablet
Jagan Teki
jagannadh.teki at gmail.com
Mon Jul 16 10:03:29 UTC 2018
On Mon, Jul 16, 2018 at 3:10 PM, Maxime Ripard
<maxime.ripard at bootlin.com> wrote:
> On Mon, Jul 16, 2018 at 01:49:39PM +0530, Jagan Teki wrote:
>> Reuse mmc0 node from sun7i-a20.dtsi like other board
>> dts files for Primo73 tablet dts file, and drop in dts
>> mmc0 definition.
>>
>> Cc: Siarhei Siamashka <siarhei.siamashka at gmail.com>
>> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
>> ---
>> arch/arm/dts/sun7i-a20-primo73.dts | 20 ++++++++++----------
>> 1 file changed, 10 insertions(+), 10 deletions(-)
>>
>> diff --git a/arch/arm/dts/sun7i-a20-primo73.dts b/arch/arm/dts/sun7i-a20-primo73.dts
>> index 0658f82675..942a955309 100644
>> --- a/arch/arm/dts/sun7i-a20-primo73.dts
>> +++ b/arch/arm/dts/sun7i-a20-primo73.dts
>> @@ -62,16 +62,6 @@
>> };
>>
>> soc at 01c00000 {
>> - mmc0: mmc at 01c0f000 {
>> - pinctrl-names = "default";
>> - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
>> - vmmc-supply = <®_vcc3v3>;
>> - bus-width = <4>;
>> - cd-gpios = <&pio 7 1 0>; /* PH1 */
>> - cd-inverted;
>> - status = "okay";
>> - };
>> -
>> usbphy: phy at 01c13400 {
>> usb2_vbus-supply = <®_usb2_vbus>;
>> status = "okay";
>> @@ -100,3 +90,13 @@
>> status = "okay";
>> };
>> };
>> +
>> +&mmc0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
>> + vmmc-supply = <®_vcc3v3>;
>> + bus-width = <4>;
>> + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
>> + cd-inverted;
>> + status = "okay";
>> +};
>
> You're not adding the node, you're just moving it around.
ie what I mentioned on the commit message. adding mmc0 node like other
board dts files and removing in dts mmc0 node definition.
More information about the U-Boot
mailing list