[U-Boot] [PATCH v2 04/11] net: phy: ti: Add lane swapping support in the DP83867 TI's PHY driver
Janine Hagemann
j.hagemann at phytec.de
Wed Jul 18 08:46:41 UTC 2018
This patch adds support for enabling or disabling the lane swapping
(called "port mirroring" in PHY's CFG4 register) feature of the DP83867
TI's PHY device.
One use case is when bootstrap configuration enables this feature (because
of e.g. LED_0 wrong wiring) so then one needs to disable it in software
(at u-boot/Linux).
Based on commit fc6d39c39581 ("net: phy: dp83867: Add lane swapping
support in the DP83867 TI's PHY driver") of mainline linux kernel.
Signed-off-by: Janine Hagemann <j.hagemann at phytec.de>
---
v2: Change commit reference format
---
drivers/net/phy/ti.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/net/phy/ti.c b/drivers/net/phy/ti.c
index 8f3ed8a..bc4fb2b 100644
--- a/drivers/net/phy/ti.c
+++ b/drivers/net/phy/ti.c
@@ -24,6 +24,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define DP83867_CTRL 0x1f
/* Extended Registers */
+#define DP83867_CFG4 0x0031
#define DP83867_RGMIICTL 0x0032
#define DP83867_RGMIIDCTL 0x0086
#define DP83867_IO_MUX_CFG 0x0170
@@ -90,11 +91,21 @@ DECLARE_GLOBAL_DATA_PTR;
#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MAX 0x0
#define DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN 0x1f
+/* CFG4 bits */
+#define DP83867_CFG4_PORT_MIRROR_EN BIT(0)
+
+enum {
+ DP83867_PORT_MIRRORING_KEEP,
+ DP83867_PORT_MIRRORING_EN,
+ DP83867_PORT_MIRRORING_DIS,
+};
+
struct dp83867_private {
int rx_id_delay;
int tx_id_delay;
int fifo_depth;
int io_impedance;
+ int port_mirroring;
};
/**
@@ -163,6 +174,26 @@ void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
phy_write(phydev, addr, MII_MMD_DATA, data);
}
+static int dp83867_config_port_mirroring(struct phy_device *phydev)
+{
+ struct dp83867_private *dp83867 =
+ (struct dp83867_private *)phydev->priv;
+ u16 val;
+
+ val = phy_read_mmd_indirect(phydev, DP83867_CFG4, DP83867_DEVADDR,
+ phydev->addr);
+
+ if (dp83867->port_mirroring == DP83867_PORT_MIRRORING_EN)
+ val |= DP83867_CFG4_PORT_MIRROR_EN;
+ else
+ val &= ~DP83867_CFG4_PORT_MIRROR_EN;
+
+ phy_write_mmd_indirect(phydev, DP83867_CFG4, DP83867_DEVADDR,
+ phydev->addr, val);
+
+ return 0;
+}
+
#if defined(CONFIG_DM_ETH)
/**
* dp83867_data_init - Convenience function for setting PHY specific data
@@ -189,6 +220,12 @@ static int dp83867_of_init(struct phy_device *phydev)
dp83867->tx_id_delay = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev),
"ti,tx-internal-delay", -1);
+ if (fdtdec_get_bool(fdt, node, "enet-phy-lane-swap"))
+ dp83867->port_mirroring = DP83867_PORT_MIRRORING_EN;
+
+ if (fdtdec_get_bool(fdt, node, "enet-phy-lane-no-swap"))
+ dp83867->port_mirroring = DP83867_PORT_MIRRORING_DIS;
+
dp83867->fifo_depth = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev),
"ti,fifo-depth", -1);
@@ -300,6 +337,9 @@ static int dp83867_config(struct phy_device *phydev)
}
}
+ if (dp83867->port_mirroring != DP83867_PORT_MIRRORING_KEEP)
+ dp83867_config_port_mirroring(phydev);
+
genphy_config_aneg(phydev);
return 0;
--
2.7.4
More information about the U-Boot
mailing list