[U-Boot] [PATCH 2/3] drivers: fpga: zynqpl: fix compilation with SPL

[Luis Araneda]

Disable the use of function zynq_loadfs when compiling
the driver for the SPL, as the following filesystem
functions are not found by the linker:
- fs_set_blk_dev
- fs_read
- fs_set_blk_dev
- fs_read
- fs_read

Signed-off-by: Luis Araneda <luaraneda at gmail.com>
---
 drivers/fpga/zynqpl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/fpga/zynqpl.c b/drivers/fpga/zynqpl.c
index fd37d18c7f..8e49c7010e 100644
--- a/drivers/fpga/zynqpl.c
+++ b/drivers/fpga/zynqpl.c
@@ -410,7 +410,7 @@ static int zynq_load(xilinx_desc *desc, const void *buf, size_t bsize,
 	return FPGA_SUCCESS;
 }
 
-#if defined(CONFIG_CMD_FPGA_LOADFS)
+#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_SPL_BUILD)
 static int zynq_loadfs(xilinx_desc *desc, const void *buf, size_t bsize,
 		       fpga_fs_info *fsinfo)
 {
@@ -493,7 +493,7 @@ static int zynq_loadfs(xilinx_desc *desc, const void *buf, size_t bsize,
 
 struct xilinx_fpga_op zynq_op = {
 	.load = zynq_load,
-#if defined(CONFIG_CMD_FPGA_LOADFS)
+#if defined(CONFIG_CMD_FPGA_LOADFS) && !defined(CONFIG_SPL_BUILD)
 	.loadfs = zynq_loadfs,
 #endif
 };
-- 
2.18.0