[U-Boot] [PATCH 00/20] Add support for 1wire protocol and 1wire eeproms

[Eugen Hristev]

This is a patch series originally written by Maxime Ripard,
https://lists.denx.de/pipermail/u-boot/2016-November/272138.html

titled:

[U-Boot] [PATCH RESEND 0/9] sunxi: chip: Enable the DIP auto-detection

and reworked to include support for the EEPROMs on the PDAs connected
to the sama xplained boards.

The patch series adds first a driver for onewire uclass, and onewire over
gpio bitbanging driver. Then it adds a uclass for onewire EEPROMS, and
specific driver for Maxim EEPROMs. I have added some sandbox support,
configuration and device tree for it and for boards sama5d2_xplained
and sama5d3_xplained. Also added common code for PDA detection, as the memory
on the PDAs is connected to the SoC on the onewire bus.

Thanks to everyone for the review and feedback.

Below is a short summary of the commits:

The series adds a w1-uclass driver for the onewire interface u-class.
This is done in patch:
[PATCH 01/20] w1: Add 1-Wire uclass

Also, we add a driver for the w1-uclass specific to the onewire over
bitbanged gpio, this is done in patch:
[PATCH 02/20] w1: Add 1-Wire gpio driver

Add the bindings documentation in:
[PATCH 03/20] dt-bindings: W1: w1-gpio: added bindings for w1-gpio

A uclass driver is added for one wire eeproms, in patch :
[PATCH 04/20] W1-EEPROM: Add an W1-EEPROM uclass for 1 wire EEPROMs

Specific driver for the DS24 Maxim EEPROMs is added in the patch:
[PATCH 05/20] W1-EEPROM: add support for Maxim DS24 eeprom families

A sandbox driver for a onewire EEPROM is added in patch:
[PATCH 06/20] W1-EEPROM: add sandbox driver

A command is added for the onewire protocol in patch:
[PATCH 07/20] w1: add command for onewire protocol

Pinctrl driver for sandbox was updated to add a new group and function for w1:
[PATCH 08/20] pinctrl: sandbox: add gpio onewire w1 group

Add a node in sandbox DT to have a test node for sandbox.
[PATCH 09/20] sandbox: DTS: w1: add node for one wire interface on
 GPIO

The defconfig for sandbox is updated to include the drivers:
[PATCH 10/20] configs: sandbox: add onewire w1 and sandbox
 eeprom

Modify the w1 class driver to add a sandbox device if sandbox is configured:
[PATCH 11/20] w1: enumerate sandbox driver if configured

Configuration for sama5d2 xplained is updated in patch:
[PATCH 12/20] configs: sama5d2_xplained: add onewire and eeprom

Configuration for sama5d3 xplained is updated in patch:
[PATCH 13/20] configs: sama5d3_xplained: add onewire and eeprom

Pda detection is added in the common part for atmel boards:
[PATCH 14/20] board: atmel: add support for pda detection

Specifically add it for Sama5d2 xplained board in patch:
[PATCH 15/20] board: sama5d2_xplained: add pda detect call at init
 time

Specifically add it for Sama5d3 xplained board in patch:
[PATCH 16/20] board: sama5d3_xplained: add pda detect call at init
 time

Add support for overlays for sama5d2 xplained config in patch:
[PATCH 17/20] configs: sama5d2_xplained: add fdt overlay support

Add support for overlays for sama5d3 xplained config in patch:
[PATCH 18/20] configs: sama5d3_xplained: add fdt overlay support

The DT for the SAMA5D2 Soc and xplained is updated to include a onewire node.
This is done in patch:
[PATCH 19/20] ARM: dts: at91: sama5d2_xplained: add onewire connector

The DT for the SAMA5D3 Soc and xplained is updated to include a onewire node.
This is done in patch:
[PATCH 20/20] ARM: dts: at91: sama5d3_xplained: add onewire connector


Eugen Hristev (16):
  dt-bindings: W1: w1-gpio: added bindings for w1-gpio
  W1-EEPROM: add sandbox driver
  w1: add command for onewire protocol
  pinctrl: sandbox: add gpio onewire w1 group
  sandbox: DTS: w1: add node for one wire interface on GPIO
  configs: sandbox: add onewire w1 and sandbox eeprom
  w1: enumerate sandbox driver if configured
  configs: sama5d2_xplained: add onewire and eeprom drivers
  configs: sama5d3_xplained: add onewire and eeprom drivers
  board: atmel: add support for pda detection
  board: sama5d2_xplained: add pda detect call at init time
  board: sama5d3_xplained: add pda detect call at init time
  configs: sama5d2_xplained: add fdt overlay support
  configs: sama5d3_xplained: add fdt overlay support
  ARM: dts: at91: sama5d2_xplained: add onewire connector for LCD eeprom
  ARM: dts: at91: sama5d3_xplained: add onewire connector for LCD eeprom

Maxime Ripard (4):
  w1: Add 1-Wire uclass
  w1: Add 1-Wire gpio driver
  W1-EEPROM: Add an W1-EEPROM uclass for 1 wire EEPROMs
  W1-EEPROM: add support for Maxim DS24 eeprom families

 arch/arm/dts/at91-sama5d2_xplained.dts          |  12 ++
 arch/arm/dts/at91-sama5d3_xplained.dts          |  12 ++
 arch/arm/dts/sama5d2.dtsi                       |   6 +
 arch/arm/dts/sama5d3.dtsi                       |   6 +
 arch/arm/mach-at91/Kconfig                      |   1 +
 arch/sandbox/dts/sandbox.dts                    |  15 ++
 board/atmel/common/board.c                      |  55 +++++
 board/atmel/sama5d2_xplained/sama5d2_xplained.c |   3 +
 board/atmel/sama5d3_xplained/sama5d3_xplained.c |  10 +
 cmd/Kconfig                                     |   7 +
 cmd/Makefile                                    |   1 +
 cmd/w1.c                                        | 121 +++++++++++
 configs/sama5d2_xplained_mmc_defconfig          |   5 +
 configs/sama5d2_xplained_spiflash_defconfig     |   5 +
 configs/sama5d3_xplained_mmc_defconfig          |   5 +
 configs/sama5d3_xplained_nandflash_defconfig    |   5 +
 configs/sandbox_defconfig                       |   4 +
 doc/device-tree-bindings/w1/w1-gpio.txt         |  26 +++
 drivers/Kconfig                                 |   4 +
 drivers/Makefile                                |   2 +
 drivers/pinctrl/pinctrl-sandbox.c               |   3 +
 drivers/w1-eeprom/Kconfig                       |  29 +++
 drivers/w1-eeprom/Makefile                      |   5 +
 drivers/w1-eeprom/ds24xxx.c                     |  46 ++++
 drivers/w1-eeprom/eep_sandbox.c                 |  57 +++++
 drivers/w1-eeprom/w1-eeprom-uclass.c            |  56 +++++
 drivers/w1/Kconfig                              |  25 +++
 drivers/w1/Makefile                             |   3 +
 drivers/w1/w1-gpio.c                            | 158 ++++++++++++++
 drivers/w1/w1-uclass.c                          | 273 ++++++++++++++++++++++++
 include/dm/uclass-id.h                          |   2 +
 include/w1-eeprom.h                             |  28 +++
 include/w1.h                                    |  49 +++++
 33 files changed, 1039 insertions(+)
 create mode 100644 cmd/w1.c
 create mode 040000 doc/device-tree-bindings/w1
 create mode 100644 doc/device-tree-bindings/w1/w1-gpio.txt
 create mode 040000 drivers/w1-eeprom
 create mode 100644 drivers/w1-eeprom/Kconfig
 create mode 100644 drivers/w1-eeprom/Makefile
 create mode 100644 drivers/w1-eeprom/ds24xxx.c
 create mode 100644 drivers/w1-eeprom/eep_sandbox.c
 create mode 100644 drivers/w1-eeprom/w1-eeprom-uclass.c
 create mode 040000 drivers/w1
 create mode 100644 drivers/w1/Kconfig
 create mode 100644 drivers/w1/Makefile
 create mode 100644 drivers/w1/w1-gpio.c
 create mode 100644 drivers/w1/w1-uclass.c
 create mode 100644 include/w1-eeprom.h
 create mode 100644 include/w1.h

-- 
2.7.4