[U-Boot] [PATCH 01/16] pico-imx7d: Convert to distro config

[Michael Nazzareno Trimarchi]

Hi Otavio

On Fri, Jun 29, 2018 at 8:19 PM, Otavio Salvador
<otavio at ossystems.com.br> wrote:
> From: Fabio Estevam <festevam at gmail.com>
>
> Instead of keeping a custom environment, use a more generic approach
> by switching to disto config.
>
> Signed-off-by: Fabio Estevam <festevam at gmail.com>
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
> ---
>

For all the series please add Tested-by: Michael Trimarchi
<michael at amarulasolutions.com>

>  include/configs/pico-imx7d.h | 55 +++++++++---------------------------
>  1 file changed, 14 insertions(+), 41 deletions(-)
>
> diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h
> index d2ffa70fc5..243c12faea 100644
> --- a/include/configs/pico-imx7d.h
> +++ b/include/configs/pico-imx7d.h
> @@ -41,48 +41,21 @@
>         "console=ttymxc4\0" \
>         "fdt_high=0xffffffff\0" \
>         "initrd_high=0xffffffff\0" \
> -       "fdt_file=imx7d-pico-pi.dtb\0" \
> +       "fdtfile=imx7d-pico-pi.dtb\0" \
>         "fdt_addr=0x83000000\0" \
> -       "ip_dyn=yes\0" \
> -       "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
> -       "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
> -       "finduuid=part uuid mmc 0:2 uuid\0" \
> -       "mmcargs=setenv bootargs console=${console},${baudrate} " \
> -               "root=PARTUUID=${uuid} rootwait rw\0" \
> -       "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
> -       "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
> -       "mmcboot=echo Booting from mmc ...; " \
> -               "run finduuid; " \
> -               "run mmcargs; " \
> -               "if run loadfdt; then " \
> -                       "bootz ${loadaddr} - ${fdt_addr}; " \
> -               "else " \
> -                       "echo WARN: Cannot load the DT; " \
> -               "fi;\0" \
> -       "netargs=setenv bootargs console=${console},${baudrate} " \
> -               "root=/dev/nfs " \
> -       "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
> -               "netboot=echo Booting from net ...; " \
> -               "run netargs; " \
> -               "if test ${ip_dyn} = yes; then " \
> -                       "setenv get_cmd dhcp; " \
> -               "else " \
> -                       "setenv get_cmd tftp; " \
> -               "fi; " \
> -               "${get_cmd} ${image}; " \
> -               "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
> -                       "bootz ${loadaddr} - ${fdt_addr}; " \
> -               "else " \
> -                       "echo WARN: Cannot load the DT; " \
> -               "fi;\0"
> -
> -#define CONFIG_BOOTCOMMAND \
> -       "if mmc rescan; then " \
> -               "if run loadimage; then " \
> -                       "run mmcboot; " \
> -               "else run netboot; " \
> -               "fi; " \
> -       "else run netboot; fi"
> +       "fdt_addr_r=0x83000000\0" \
> +       "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
> +       "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
> +       "ramdisk_addr_r=0x83000000\0" \
> +       "ramdiskaddr=0x83000000\0" \
> +       "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
> +       BOOTENV
> +
> +#define BOOT_TARGET_DEVICES(func) \
> +       func(MMC, mmc, 0) \
> +       func(DHCP, dhcp, na)
> +
> +#include <config_distro_bootcmd.h>
>
>  #define CONFIG_SYS_MEMTEST_START       0x80000000
>  #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + 0x20000000)
> --
> 2.18.0
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot



-- 
| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
| COO  -  Founder                                      Cruquiuskade 47 |
| +31(0)851119172                                 Amsterdam 1018 AM NL |
|                  [`as] http://www.amarulasolutions.com               |