[U-Boot] [PATCH v2 5/6] usb: musb-new: sunxi: Add proper musb exit support

[Jagan Teki]

musb have platform ops to do proper graceful exit,
so add the exit call and move musb platform exit code
instead of keeping it in driver remove.
This make proper shutdown of musb where .remove will
call disable, exit serially via musb_stop.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v2:
- use driver data for sun6i changes

 drivers/usb/musb-new/sunxi.c | 49 ++++++++++++++++++++----------------
 1 file changed, 28 insertions(+), 21 deletions(-)

diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index d909b9ea53..6cf9826cda 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -331,6 +331,33 @@ static int sunxi_musb_init(struct musb *musb)
 	return 0;
 }
 
+static int sunxi_musb_exit(struct musb *musb)
+{
+	struct sunxi_glue *glue = to_sunxi_glue(musb->controller);
+	int ret = 0;
+
+	if (generic_phy_valid(&glue->phy)) {
+		ret = generic_phy_exit(&glue->phy);
+		if (ret) {
+			dev_err(dev, "failed to power off usb phy\n");
+			return ret;
+		}
+	}
+
+	if (glue->cfg->has_reset)
+		clrbits_le32(glue->reg_reset0, BIT(AHB_GATE_OFFSET_USB0));
+
+	if (glue->cfg->rst_bit)
+		clrbits_le32(glue->reg_reset0, BIT(glue->cfg->rst_bit));
+
+	clrbits_le32(&glue->ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_USB0));
+	if (glue->cfg->clkgate_bit)
+		clrbits_le32(&glue->ccm->ahb_gate0,
+			     BIT(glue->cfg->clkgate_bit));
+
+	return 0;
+}
+
 static void sunxi_musb_pre_root_reset_end(struct musb *musb)
 {
 	struct sunxi_glue *glue = to_sunxi_glue(musb->controller);
@@ -347,6 +374,7 @@ static void sunxi_musb_post_root_reset_end(struct musb *musb)
 
 static const struct musb_platform_ops sunxi_musb_ops = {
 	.init		= sunxi_musb_init,
+	.exit		= sunxi_musb_exit,
 	.enable		= sunxi_musb_enable,
 	.disable	= sunxi_musb_disable,
 	.pre_root_reset_end = sunxi_musb_pre_root_reset_end,
@@ -463,29 +491,8 @@ static int musb_usb_remove(struct udevice *dev)
 {
 	struct sunxi_glue *glue = dev_get_priv(dev);
 	struct musb_host_data *host = &glue->mdata;
-	int ret;
-
-	if (generic_phy_valid(&glue->phy)) {
-		ret = generic_phy_exit(&glue->phy);
-		if (ret) {
-			pr_err("failed to exit %s USB PHY\n", dev->name);
-			return ret;
-		}
-	}
 
 	musb_stop(host->host);
-
-	if (glue->cfg->has_reset)
-		clrbits_le32(glue->reg_reset0, BIT(AHB_GATE_OFFSET_USB0));
-
-	if (glue->cfg->rst_bit)
-		clrbits_le32(glue->reg_reset0, BIT(glue->cfg->rst_bit));
-
-	clrbits_le32(&glue->ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_USB0));
-	if (glue->cfg->clkgate_bit)
-		clrbits_le32(&glue->ccm->ahb_gate0,
-			     BIT(glue->cfg->clkgate_bit));
-
 	free(host->host);
 	host->host = NULL;
 
-- 
2.17.1