[U-Boot] [PATCH v2 12/13] sunxi: add support for Allwinner H6 SoC
Icenowy Zheng
icenowy at aosc.io
Sat Jul 21 08:20:31 UTC 2018
Allwinner H6 is a new SoC from Allwinner features USB3 and PCIe
interfaces.
This patch adds support for it.
The corresponding DTSI file, from Linux next-20180720, is also
introduced.
Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
---
Changes in v2:
- Sync device tree to next-20180720.
arch/arm/dts/sun50i-h6.dtsi | 288 ++++++++++++++++++++
arch/arm/mach-sunxi/Kconfig | 17 +-
arch/arm/mach-sunxi/cpu_info.c | 2 +
common/spl/Kconfig | 2 +-
include/dt-bindings/clock/sun50i-h6-ccu.h | 125 +++++++++
include/dt-bindings/clock/sun50i-h6-r-ccu.h | 24 ++
include/dt-bindings/reset/sun50i-h6-ccu.h | 73 +++++
include/dt-bindings/reset/sun50i-h6-r-ccu.h | 17 ++
8 files changed, 546 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/dts/sun50i-h6.dtsi
create mode 100644 include/dt-bindings/clock/sun50i-h6-ccu.h
create mode 100644 include/dt-bindings/clock/sun50i-h6-r-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-h6-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-h6-r-ccu.h
diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
new file mode 100644
index 0000000000..cfa5fffcf6
--- /dev/null
+++ b/arch/arm/dts/sun50i-h6.dtsi
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.io>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-h6-ccu.h>
+#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu at 1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu at 2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu at 3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <3>;
+ enable-method = "psci";
+ };
+ };
+
+ iosc: internal-osc-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <16000000>;
+ clock-accuracy = <300000000>;
+ clock-output-names = "iosc";
+ };
+
+ osc24M: osc24M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ccu: clock at 3001000 {
+ compatible = "allwinner,sun50i-h6-ccu";
+ reg = <0x03001000 0x1000>;
+ clocks = <&osc24M>, <&osc32k>, <&iosc>;
+ clock-names = "hosc", "losc", "iosc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ gic: interrupt-controller at 3021000 {
+ compatible = "arm,gic-400";
+ reg = <0x03021000 0x1000>,
+ <0x03022000 0x2000>,
+ <0x03024000 0x2000>,
+ <0x03026000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ pio: pinctrl at 300b000 {
+ compatible = "allwinner,sun50i-h6-pinctrl";
+ reg = <0x0300b000 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ mmc0_pins: mmc0-pins {
+ pins = "PF0", "PF1", "PF2", "PF3",
+ "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ mmc2_pins: mmc2-pins {
+ pins = "PC1", "PC4", "PC5", "PC6",
+ "PC7", "PC8", "PC9", "PC10",
+ "PC11", "PC12", "PC13", "PC14";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
+ uart0_ph_pins: uart0-ph {
+ pins = "PH0", "PH1";
+ function = "uart0";
+ };
+ };
+
+ mmc0: mmc at 4020000 {
+ compatible = "allwinner,sun50i-h6-mmc",
+ "allwinner,sun50i-a64-mmc";
+ reg = <0x04020000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC0>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc at 4021000 {
+ compatible = "allwinner,sun50i-h6-mmc",
+ "allwinner,sun50i-a64-mmc";
+ reg = <0x04021000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC1>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc at 4022000 {
+ compatible = "allwinner,sun50i-h6-emmc",
+ "allwinner,sun50i-a64-emmc";
+ reg = <0x04022000 0x1000>;
+ clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu RST_BUS_MMC2>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ uart0: serial at 5000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05000000 0x400>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
+ status = "disabled";
+ };
+
+ uart1: serial at 5000400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05000400 0x400>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
+ status = "disabled";
+ };
+
+ uart2: serial at 5000800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05000800 0x400>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
+ status = "disabled";
+ };
+
+ uart3: serial at 5000c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x05000c00 0x400>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
+ status = "disabled";
+ };
+
+ r_ccu: clock at 7010000 {
+ compatible = "allwinner,sun50i-h6-r-ccu";
+ reg = <0x07010000 0x400>;
+ clocks = <&osc24M>, <&osc32k>, <&iosc>,
+ <&ccu CLK_PLL_PERIPH0>;
+ clock-names = "hosc", "losc", "iosc", "pll-periph";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ r_intc: interrupt-controller at 7021000 {
+ compatible = "allwinner,sun50i-h6-r-intc",
+ "allwinner,sun6i-a31-r-intc";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x07021000 0x400>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ r_pio: pinctrl at 7022000 {
+ compatible = "allwinner,sun50i-h6-r-pinctrl";
+ reg = <0x07022000 0x400>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ r_i2c_pins: r-i2c {
+ pins = "PL0", "PL1";
+ function = "s_i2c";
+ };
+ };
+
+ r_i2c: i2c at 7081400 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x07081400 0x400>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu CLK_R_APB2_I2C>;
+ resets = <&r_ccu RST_R_APB2_I2C>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_i2c_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 32a46797e2..558363b52d 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -82,6 +82,7 @@ config SUN8I_RSB
config SUNXI_SRAM_ADDRESS
hex
default 0x10000 if MACH_SUN9I || MACH_SUN50I || MACH_SUN50I_H5
+ default 0x20000 if MACH_SUN50I_H6
default 0x0
---help---
Older Allwinner SoCs have their mask boot ROM mapped just below 4GB,
@@ -287,6 +288,14 @@ config MACH_SUN50I_H5
select FIT
select SPL_LOAD_FIT
+config MACH_SUN50I_H6
+ bool "sun50i (Allwinner H6)"
+ select ARM64
+ select SUPPORT_SPL
+ select FIT
+ select SPL_LOAD_FIT
+ select DRAM_SUN50I_H6
+
endchoice
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
@@ -380,6 +389,7 @@ config DRAM_CLK
default 360 if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || \
MACH_SUN8I_V3S
default 672 if MACH_SUN50I
+ default 744 if MACH_SUN50I_H6
---help---
Set the dram clock speed, valid range 240 - 480 (prior to sun9i),
must be a multiple of 24. For the sun9i (A80), the tested values
@@ -399,7 +409,7 @@ config DRAM_ZQ
default 123 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I
default 127 if MACH_SUN7I
default 14779 if MACH_SUN8I_V3S
- default 3881979 if MACH_SUN8I_R40
+ default 3881979 if MACH_SUN8I_R40 || MACH_SUN50I_H6
default 4145117 if MACH_SUN9I
default 3881915 if MACH_SUN50I
---help---
@@ -411,6 +421,7 @@ config DRAM_ODT_EN
default y if MACH_SUN8I_A23
default y if MACH_SUN8I_R40
default y if MACH_SUN50I
+ default y if MACH_SUN50I_H6
---help---
Select this to enable dram odt (on die termination).
@@ -501,6 +512,7 @@ config SYS_CLK_FREQ
default 816000000 if MACH_SUN50I || MACH_SUN50I_H5
default 1008000000 if MACH_SUN8I
default 1008000000 if MACH_SUN9I
+ default 888000000 if MACH_SUN50I_H6
config SYS_CONFIG_NAME
default "sun4i" if MACH_SUN4I
@@ -510,6 +522,7 @@ config SYS_CONFIG_NAME
default "sun8i" if MACH_SUN8I
default "sun9i" if MACH_SUN9I
default "sun50i" if MACH_SUN50I
+ default "sun50i" if MACH_SUN50I_H6
config SYS_BOARD
default "sunxi"
@@ -715,6 +728,7 @@ config VIDEO_SUNXI
depends on !MACH_SUN8I_V3S
depends on !MACH_SUN9I
depends on !MACH_SUN50I
+ depends on !MACH_SUN50I_H6
select VIDEO
imply VIDEO_DT_SIMPLEFB
default y
@@ -947,6 +961,7 @@ config SPL_STACK_R_ADDR
default 0x4fe00000 if MACH_SUN8I
default 0x2fe00000 if MACH_SUN9I
default 0x4fe00000 if MACH_SUN50I
+ default 0x4fe00000 if MACH_SUN50I_H6
config SPL_SPI_SUNXI
bool "Support for SPI Flash on Allwinner SoCs in SPL"
diff --git a/arch/arm/mach-sunxi/cpu_info.c b/arch/arm/mach-sunxi/cpu_info.c
index aadf575ef2..ae4745bfec 100644
--- a/arch/arm/mach-sunxi/cpu_info.c
+++ b/arch/arm/mach-sunxi/cpu_info.c
@@ -96,6 +96,8 @@ int print_cpuinfo(void)
puts("CPU: Allwinner A64 (SUN50I)\n");
#elif defined CONFIG_MACH_SUN50I_H5
puts("CPU: Allwinner H5 (SUN50I)\n");
+#elif defined CONFIG_MACH_SUN50I_H6
+ puts("CPU: Allwinner H6 (SUN50I)\n");
#else
#warning Please update cpu_info.c with correct CPU information
puts("CPU: SUNXI Family\n");
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 99c9053ab8..954f055123 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -256,7 +256,7 @@ config SPL_SHA256_SUPPORT
config SPL_FIT_IMAGE_TINY
bool "Remove functionality from SPL FIT loading to reduce size"
depends on SPL_FIT
- default y if MACH_SUN50I || MACH_SUN50I_H5
+ default y if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN50I_H6
help
Enable this to reduce the size of the FIT image loading code
in SPL, if space for the SPL binary is very tight.
diff --git a/include/dt-bindings/clock/sun50i-h6-ccu.h b/include/dt-bindings/clock/sun50i-h6-ccu.h
new file mode 100644
index 0000000000..a1545cd60e
--- /dev/null
+++ b/include/dt-bindings/clock/sun50i-h6-ccu.h
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.io>
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_H6_H_
+#define _DT_BINDINGS_CLK_SUN50I_H6_H_
+
+#define CLK_PLL_PERIPH0 3
+
+#define CLK_CPUX 21
+
+#define CLK_APB1 26
+
+#define CLK_DE 29
+#define CLK_BUS_DE 30
+#define CLK_DEINTERLACE 31
+#define CLK_BUS_DEINTERLACE 32
+#define CLK_GPU 33
+#define CLK_BUS_GPU 34
+#define CLK_CE 35
+#define CLK_BUS_CE 36
+#define CLK_VE 37
+#define CLK_BUS_VE 38
+#define CLK_EMCE 39
+#define CLK_BUS_EMCE 40
+#define CLK_VP9 41
+#define CLK_BUS_VP9 42
+#define CLK_BUS_DMA 43
+#define CLK_BUS_MSGBOX 44
+#define CLK_BUS_SPINLOCK 45
+#define CLK_BUS_HSTIMER 46
+#define CLK_AVS 47
+#define CLK_BUS_DBG 48
+#define CLK_BUS_PSI 49
+#define CLK_BUS_PWM 50
+#define CLK_BUS_IOMMU 51
+
+#define CLK_MBUS_DMA 53
+#define CLK_MBUS_VE 54
+#define CLK_MBUS_CE 55
+#define CLK_MBUS_TS 56
+#define CLK_MBUS_NAND 57
+#define CLK_MBUS_CSI 58
+#define CLK_MBUS_DEINTERLACE 59
+
+#define CLK_NAND0 61
+#define CLK_NAND1 62
+#define CLK_BUS_NAND 63
+#define CLK_MMC0 64
+#define CLK_MMC1 65
+#define CLK_MMC2 66
+#define CLK_BUS_MMC0 67
+#define CLK_BUS_MMC1 68
+#define CLK_BUS_MMC2 69
+#define CLK_BUS_UART0 70
+#define CLK_BUS_UART1 71
+#define CLK_BUS_UART2 72
+#define CLK_BUS_UART3 73
+#define CLK_BUS_I2C0 74
+#define CLK_BUS_I2C1 75
+#define CLK_BUS_I2C2 76
+#define CLK_BUS_I2C3 77
+#define CLK_BUS_SCR0 78
+#define CLK_BUS_SCR1 79
+#define CLK_SPI0 80
+#define CLK_SPI1 81
+#define CLK_BUS_SPI0 82
+#define CLK_BUS_SPI1 83
+#define CLK_BUS_EMAC 84
+#define CLK_TS 85
+#define CLK_BUS_TS 86
+#define CLK_IR_TX 87
+#define CLK_BUS_IR_TX 88
+#define CLK_BUS_THS 89
+#define CLK_I2S3 90
+#define CLK_I2S0 91
+#define CLK_I2S1 92
+#define CLK_I2S2 93
+#define CLK_BUS_I2S0 94
+#define CLK_BUS_I2S1 95
+#define CLK_BUS_I2S2 96
+#define CLK_BUS_I2S3 97
+#define CLK_SPDIF 98
+#define CLK_BUS_SPDIF 99
+#define CLK_DMIC 100
+#define CLK_BUS_DMIC 101
+#define CLK_AUDIO_HUB 102
+#define CLK_BUS_AUDIO_HUB 103
+#define CLK_USB_OHCI0 104
+#define CLK_USB_PHY0 105
+#define CLK_USB_PHY1 106
+#define CLK_USB_OHCI3 107
+#define CLK_USB_PHY3 108
+#define CLK_USB_HSIC_12M 109
+#define CLK_USB_HSIC 110
+#define CLK_BUS_OHCI0 111
+#define CLK_BUS_OHCI3 112
+#define CLK_BUS_EHCI0 113
+#define CLK_BUS_XHCI 114
+#define CLK_BUS_EHCI3 115
+#define CLK_BUS_OTG 116
+#define CLK_PCIE_REF_100M 117
+#define CLK_PCIE_REF 118
+#define CLK_PCIE_REF_OUT 119
+#define CLK_PCIE_MAXI 120
+#define CLK_PCIE_AUX 121
+#define CLK_BUS_PCIE 122
+#define CLK_HDMI 123
+#define CLK_HDMI_SLOW 124
+#define CLK_HDMI_CEC 125
+#define CLK_BUS_HDMI 126
+#define CLK_BUS_TCON_TOP 127
+#define CLK_TCON_LCD0 128
+#define CLK_BUS_TCON_LCD0 129
+#define CLK_TCON_TV0 130
+#define CLK_BUS_TCON_TV0 131
+#define CLK_CSI_CCI 132
+#define CLK_CSI_TOP 133
+#define CLK_CSI_MCLK 134
+#define CLK_BUS_CSI 135
+#define CLK_HDCP 136
+#define CLK_BUS_HDCP 137
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_H6_H_ */
diff --git a/include/dt-bindings/clock/sun50i-h6-r-ccu.h b/include/dt-bindings/clock/sun50i-h6-r-ccu.h
new file mode 100644
index 0000000000..76136132a1
--- /dev/null
+++ b/include/dt-bindings/clock/sun50i-h6-r-ccu.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy at aosc.xyz>
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_H6_R_CCU_H_
+#define _DT_BINDINGS_CLK_SUN50I_H6_R_CCU_H_
+
+#define CLK_AR100 0
+
+#define CLK_R_APB1 2
+
+#define CLK_R_APB1_TIMER 4
+#define CLK_R_APB1_TWD 5
+#define CLK_R_APB1_PWM 6
+#define CLK_R_APB2_UART 7
+#define CLK_R_APB2_I2C 8
+#define CLK_R_APB1_IR 9
+#define CLK_R_APB1_W1 10
+
+#define CLK_IR 11
+#define CLK_W1 12
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_H6_R_CCU_H_ */
diff --git a/include/dt-bindings/reset/sun50i-h6-ccu.h b/include/dt-bindings/reset/sun50i-h6-ccu.h
new file mode 100644
index 0000000000..81106f4550
--- /dev/null
+++ b/include/dt-bindings/reset/sun50i-h6-ccu.h
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.io>
+ */
+
+#ifndef _DT_BINDINGS_RESET_SUN50I_H6_H_
+#define _DT_BINDINGS_RESET_SUN50I_H6_H_
+
+#define RST_MBUS 0
+#define RST_BUS_DE 1
+#define RST_BUS_DEINTERLACE 2
+#define RST_BUS_GPU 3
+#define RST_BUS_CE 4
+#define RST_BUS_VE 5
+#define RST_BUS_EMCE 6
+#define RST_BUS_VP9 7
+#define RST_BUS_DMA 8
+#define RST_BUS_MSGBOX 9
+#define RST_BUS_SPINLOCK 10
+#define RST_BUS_HSTIMER 11
+#define RST_BUS_DBG 12
+#define RST_BUS_PSI 13
+#define RST_BUS_PWM 14
+#define RST_BUS_IOMMU 15
+#define RST_BUS_DRAM 16
+#define RST_BUS_NAND 17
+#define RST_BUS_MMC0 18
+#define RST_BUS_MMC1 19
+#define RST_BUS_MMC2 20
+#define RST_BUS_UART0 21
+#define RST_BUS_UART1 22
+#define RST_BUS_UART2 23
+#define RST_BUS_UART3 24
+#define RST_BUS_I2C0 25
+#define RST_BUS_I2C1 26
+#define RST_BUS_I2C2 27
+#define RST_BUS_I2C3 28
+#define RST_BUS_SCR0 29
+#define RST_BUS_SCR1 30
+#define RST_BUS_SPI0 31
+#define RST_BUS_SPI1 32
+#define RST_BUS_EMAC 33
+#define RST_BUS_TS 34
+#define RST_BUS_IR_TX 35
+#define RST_BUS_THS 36
+#define RST_BUS_I2S0 37
+#define RST_BUS_I2S1 38
+#define RST_BUS_I2S2 39
+#define RST_BUS_I2S3 40
+#define RST_BUS_SPDIF 41
+#define RST_BUS_DMIC 42
+#define RST_BUS_AUDIO_HUB 43
+#define RST_USB_PHY0 44
+#define RST_USB_PHY1 45
+#define RST_USB_PHY3 46
+#define RST_USB_HSIC 47
+#define RST_BUS_OHCI0 48
+#define RST_BUS_OHCI3 49
+#define RST_BUS_EHCI0 50
+#define RST_BUS_XHCI 51
+#define RST_BUS_EHCI3 52
+#define RST_BUS_OTG 53
+#define RST_BUS_PCIE 54
+#define RST_PCIE_POWERUP 55
+#define RST_BUS_HDMI 56
+#define RST_BUS_HDMI_SUB 57
+#define RST_BUS_TCON_TOP 58
+#define RST_BUS_TCON_LCD0 59
+#define RST_BUS_TCON_TV0 60
+#define RST_BUS_CSI 61
+#define RST_BUS_HDCP 62
+
+#endif /* _DT_BINDINGS_RESET_SUN50I_H6_H_ */
diff --git a/include/dt-bindings/reset/sun50i-h6-r-ccu.h b/include/dt-bindings/reset/sun50i-h6-r-ccu.h
new file mode 100644
index 0000000000..01c84dba49
--- /dev/null
+++ b/include/dt-bindings/reset/sun50i-h6-r-ccu.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy at aosc.xyz>
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN50I_H6_R_CCU_H_
+#define _DT_BINDINGS_RST_SUN50I_H6_R_CCU_H_
+
+#define RST_R_APB1_TIMER 0
+#define RST_R_APB1_TWD 1
+#define RST_R_APB1_PWM 2
+#define RST_R_APB2_UART 3
+#define RST_R_APB2_I2C 4
+#define RST_R_APB1_IR 5
+#define RST_R_APB1_W1 6
+
+#endif /* _DT_BINDINGS_RST_SUN50I_H6_R_CCU_H_ */
--
2.17.1
More information about the U-Boot
mailing list