[U-Boot] [PATCH v2 00/11] Add ethernet support for phyCORE-RK3288
Janine Hagemann
j.hagemann at phytec.de
Mon Jul 23 09:29:34 UTC 2018
Unfortunately the v1-patches were only send to the maintainers and not
to the official mailinglist.
Am 21.07.2018 um 01:25 schrieb Grygorii Strashko:
>
>
> On 07/18/2018 03:46 AM, Janine Hagemann wrote:
>> - Remove 0004-Net-phy-ti-Fix-fifo_depth-register-write.patch because
>> of the change from 0005-net-phy-ti-Recover-from-port-mirroring-
>> N-A-MODE4.patch it isn't needed anymore. Before, the MII_DP83867_
>> PHYCTRL-register wasn't write correctly without the fix-patch.
>
> I can't find v1 of this series, so above comment looks strange.
> What's wrong exactly with "PHYCTRL-register wasn't write correctly"?
>
>>
>> - correct commit reference format
>>
>> Janine Hagemann (11):
>> arch: arm: mach-rockchip: rk3288: Enable regulators in board_init
>> config: phycore-rk3288_defconfig: add PHY_TI
>> net: gmac_rockchip: Fix a register write in rk3328_gmac_set_to_rgmii
>> net: phy: ti: Add lane swapping support in the DP83867 TI's PHY
>> driver
>> net: phy: ti: Recover from "port mirroring" N/A MODE4
>> net: phy: ti: add workaround for incorrect RX_CTRL pin strap
>> net: gmac_rockchip: Add handeling for RGMII_ID/RXID/TXID
>> drivers: net: designware: Add reading of DT phy-handle node
>> net: phy: ti: Add binding for the CLK_OUT pin muxing
>> ARM: dts: rockchip: ADD dp83867 CLK_OUT muxing
>> rockchip: rk3288-phycore: set flash1 iodomain to 1.8V
>>
>> arch/arm/dts/rk3288-phycore-som.dtsi | 1 +
>> arch/arm/mach-rockchip/rk3288-board.c | 6 ++
>> board/phytec/phycore_rk3288/phycore-rk3288.c | 16 +++++
>> configs/phycore-rk3288_defconfig | 1 +
>> doc/device-tree-bindings/net/ti,dp83867.txt | 3 +
>> drivers/net/designware.c | 11 ++-
>> drivers/net/designware.h | 1 +
>> drivers/net/gmac_rockchip.c | 80
>> ++++++++++++++++-----
>> drivers/net/phy/ti.c | 104
>> ++++++++++++++++++++++++++-
>> include/dt-bindings/net/ti-dp83867.h | 15 ++++
>> 10 files changed, 219 insertions(+), 19 deletions(-)
>>
>
More information about the U-Boot
mailing list