[U-Boot] [PATCH] configs: imx6q_logic: Cleanup ramdiskaddr and fdtaddr

[Stefano Babic]

On 20/07/2018 15:25, Adam Ford wrote:
> There are already definitions for ramdisk_addr_r and fdt_addr_r, so
> having a duplicate copy called ramdiskaddr and fdtaddr is confusing.
> This patch converts any references to ramdisk_addr_r and fdt_addr_r
> and removes the duplicates.
> 
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> 
> diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h
> index c6a7a609be..f94e27fe09 100644
> --- a/include/configs/imx6_logic.h
> +++ b/include/configs/imx6_logic.h
> @@ -35,10 +35,8 @@
>  	"script=boot.scr\0" \
>  	"image=zImage\0" \
>  	"bootm_size=0x10000000\0" \
> -	"fdt_addr_r=0x18000000\0" \
> -	"fdt_addr=0x18000000\0" \
> -	"ramdisk_addr_r=0x13000000\0" \
> -	"ramdiskaddr=0x13000000\0" \
> +	"fdt_addr_r=0x13000000\0" \
> +	"ramdisk_addr_r=0x14000000\0" \
>  	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
>  	"ramdisk_file=rootfs.cpio.uboot\0" \
>  	"boot_fdt=try\0" \
> @@ -60,25 +58,25 @@
>  	" source\0" \
>  	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image};" \
>  	" setenv kernelsize ${filesize}\0" \
> -	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
> -	"loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdiskaddr}" \
> +	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdt_file}\0" \
> +	"loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdisk_addr_r}" \
>  	" ${ramdisk_file}; setenv ramdisksize ${filesize}\0" \
>  	"mmcboot=echo Booting from mmc...; run mmcargs; run loadimage;" \
> -	" run loadfdt; bootz ${loadaddr} - ${fdt_addr}\0" \
> +	" run loadfdt; bootz ${loadaddr} - ${fdt_addr_r}\0" \
>  	"mmcramboot=run ramargs; run loadimage;" \
>  	" run loadfdt; run loadramdisk;" \
> -	" bootz ${loadaddr} ${ramdiskaddr} ${fdt_addr}\0" \
> +	" bootz ${loadaddr} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
>  	"nandboot=echo Booting from nand ...; " \
>  	" run nandargs;" \
>  	" nand read ${loadaddr} kernel ${kernelsize};" \
>  	" nand read ${fdt_addr} dtb;" \
>  	" bootz ${loadaddr} - ${fdt_addr}\0" \
>  	"nandramboot=echo Booting RAMdisk from nand ...; " \
> -	" nand read ${ramdiskaddr} fs ${ramdisksize};" \
> +	" nand read ${ramdisk_addr_r} fs ${ramdisksize};" \
>  	" nand read ${loadaddr} kernel ${kernelsize};" \
> -	" nand read ${fdt_addr} dtb;" \
> +	" nand read ${fdt_addr_r} dtb;" \
>  	" run ramargs;" \
> -	" bootz ${loadaddr} ${ramdiskaddr} ${fdt_addr}\0" \
> +	" bootz ${loadaddr} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
>  	"netargs=setenv bootargs console=${console},${baudrate} " \
>  	"root=/dev/nfs" \
>  	" ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================