[U-Boot] [PATCH 6/6] ARM: dts: stm32mp157: Add ADC DT node

[Fabrice Gasnier]

Add ADC device tree node. This allows to get analog conversions on
stm32mp157.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier at st.com>
---

 arch/arm/dts/stm32mp157.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm/dts/stm32mp157.dtsi b/arch/arm/dts/stm32mp157.dtsi
index 2b89416..88b5460 100644
--- a/arch/arm/dts/stm32mp157.dtsi
+++ b/arch/arm/dts/stm32mp157.dtsi
@@ -86,6 +86,38 @@
 			status = "disabled";
 		};
 
+		adc: adc at 48003000 {
+			compatible = "st,stm32mp1-adc-core";
+			reg = <0x48003000 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc_clk ADC12>, <&rcc_clk ADC12_K>;
+			clock-names = "bus", "adc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			adc1: adc at 0 {
+				compatible = "st,stm32mp1-adc";
+				#io-channel-cells = <1>;
+				reg = <0x0>;
+				interrupt-parent = <&adc>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			adc2: adc at 100 {
+				compatible = "st,stm32mp1-adc";
+				#io-channel-cells = <1>;
+				reg = <0x100>;
+				interrupt-parent = <&adc>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+		};
+
 		sdmmc3: sdmmc at 48004000 {
 			compatible = "st,stm32-sdmmc2";
 			reg = <0x48004000 0x400>, <0x48005000 0x400>;
-- 
1.9.1